Question

Notify Me Bookmark

Arrange in order of electronegativity (1 = highest and 5 = lowest): Sr, Al, Cl, P, Cs 1 [Choose] 2 [Choose] 3 Choose [ 4 [Choose] 5 [Choose]

Arrange in order of electronegativity (1 = highest and 5 = lowest): Sr, Al, Cl, P, Cs 1 [Choose] 2 [Choose] 3 Choose [ 4 [Choose] 5 [Choose]

Image text
Arrange in order of electronegativity ( 1 = highest and 5 = lowest): S r , A l , C l , P , C s
1
[Choose]
2
[Cheese|
3
Chosse [
4
[Cheses ]
5
[Cheose]

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Two identical loudspeakers are driven in phase by a common oscillator at 830 Hz and face each other at a distance of 1.24 m. Locate the points along the line joining the two speakers where relative minima of sound pressure amplitude would be expected. (Take the speed of sound in air to be 343 m/s. Choose one speaker as the origin and give your answers in order of increasing distance from this speaker. Enter 'none' in all unused answer boxes.) minima Distance from speaker (m)
Solution
0 0

As a torque activity, your Physics TA sets up the arrangement shown below. A uniform rod of mass mr = 173 g and length L = 100.0 cm is attached to the wall with a pin as shown. Cords are attached to the rod at the r1 = 10.0 cm and r2 = 90.0 cm mark, passed over pulleys, and masses of m1 = 266 g and m2 = 167 g are attached. Your TA asks you to determine the following. (a) The position r3 on the rod where you would suspend a mass m3 = 200 g in order to balance the rod and keep it horizontal if released from a horizontal position. In addition, for this case, what force (magnitude and direction) does the pin exert on the rod? Use standard angle notation to determine the direction of the force the pin exerts on the rod. Express the direction of the force the pin exerts on the rod as the angle θF, measured with respect to the positive x-axis (counterclockwise is positive and clockwise is negative). r3 = m Fp = N θF = (b) Let's now remove the mass m3 and determine the new mass m4 you would need to suspend from the rod at the position r4 = 20.0 cm in order to balance the rod and keep it horizontal if released from a horizontal position. In addition, for this case, what force (magnitude and direction) does the pin exert on the rod? Express the direction of the force the pin exerts on the rod as the angle θF, measured with respect to the positive x-axis (counterclockwise is positive and clockwise is negative). m4 = kg Fp = N θF = (c) Let's now remove the mass m4 and determine the mass m5 you would suspend from the rod in order to have a situation such that the pin does not exert a force on the rod and the location r5 from which you would suspend this mass in order to balance the rod and keep it horizontal if released from a horizontal position. m5 = kg r5 = m
Solution
0 0

Assuming that transistors M1 is properly biased ( Vin has a proper DC component and a small-signal component) and M1 and M2 are operating in the saturation region, and capacitor C is large enough such that at the frequency of the input small signal it can be considered as a short circuit, find Find RL such that the magnitude of the small-signal gain of the circuit, namely, ∣Vout/Vin ∣ is 5 V/V. In the following circuit we have: VDD = 3 V (W/L)3 = (W/L)5 = (W/L)6 = 10 (W/L)4 = 40 (W/L)2 = 100 (W/L)1 = 25 R = 1 kΩ The technology parameters are: λ(NMOS) = λ(PMOS) = 0 V−1, γ = 0, VTH(NMOS) = ∣VTH(PMOS)∣ = 0.5 V, μnCox = 0.5 mA/V2, μpCox = 0.25 mA/V2.

Solution
1 0