Question

Notify Me Bookmark

For the following reaction, 0.156 moles of carbon disulfide are mixed with 0.187 moles of chlorine gas. carbon disulfide(s) + chlorine(g) → carbon tetrachloride(ℓ) + sulfur dichloride (s) What is the formula for the limiting reagent? Limiting reagent: What is the maximum amount of carbon tetrachloride that can be produced? Amount = moles

For the following reaction, 0.156 moles of carbon disulfide are mixed with 0.187 moles of chlorine gas. carbon disulfide(s) + chlorine(g) → carbon tetrachloride(ℓ) + sulfur dichloride (s) What is the formula for the limiting reagent? Limiting reagent: What is the maximum amount of carbon tetrachloride that can be produced? Amount = moles

Image text
For the following reaction, 0.156 moles of carbon disulfide are mixed with 0.187 moles of chlorine gas. carbon disulfide ( s ) + chlorine ( g ) → carbon tetrachloride ( ℓ ) + sulfur dichloride ( s )
What is the formula for the limiting reagent? Limiting reagent: ◻ What is the maximum amount of carbon tetrachloride that can be produced? Amount = ◻ moles

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A D-latch is given in the Figure 1. There are 2 identical CMOS inverters with the VTC given in Figure 2. In this system, logic '1' (high) is 1.5 V and logic '0' (low) is 0 V. For the MP transistor, constant reverse leakage current is 1 μA and subthreshold current is 250 nA. Threshold voltage of MP is VT,nmos = 0.4 V. Cx is 20 nF. Figure 1: A Dynamic Logic Circuit Figure 2: VTC of the inverters. a. What is the maximum voltage value that can be observed at Vx? b. Worst-case holding time (thold) is defined as the shortest time required for the soft-node voltage drop from its initial high value to the logic threshold value due to the leakage. Consider the VTC and calculate thold.
Solution
0 0

Consider the following 2T DRAM design. All NMOS transistors are minimum sized ones with W/L ratio of 2:1. The drain diffusion capacitance and gate capacitance of the two transistors are Cd = 15 fF and Cg = 25 fF, respectively. Given k′ = μnCox = 100 μA V2, Vt,n = 0.3 V, CRBL = CWBL = 400 fF, VDD = 1.5 V, γ = 0.15 V, 2φF = −0.6 V and when accessed WL = VDD and RL¯ = 0 V. a) What is the effective store-node capacitance value, Cs? Hint: There is no explicit capacitance present at the storage node. b) Consider writing a '1' to this cell, what is the maximum voltage that can be observed at this storage node? Hint: To write a '1', WBL is driven high (its voltage goes to VDD). c) During a subsequent read operation, what should be the minimum pulse width of RLBAR for a voltage drop of VDD − 2Vtn2 on RBL? Hint: During the read, RBL is pre-charged to VDD before the cell is accessed.

Consider the following 2T DRAM design. All NMOS transistors are minimum sized ones with W/L ratio of 2:1. The drain diffusion capacitance and gate capacitance of the two transistors are Cd = 15 fF and Cg = 25 fF, respectively. Given k′ = μnCox = 100 μA V2, Vt,n = 0.3 V, CRBL = CWBL = 400 fF, VDD = 1.5 V, γ = 0.15 V, 2φF = −0.6 V and when accessed WL = VDD and RL¯ = 0 V. a) What is the effective store-node capacitance value, Cs? Hint: There is no explicit capacitance present at the storage node. b) Consider writing a '1' to this cell, what is the maximum voltage that can be observed at this storage node? Hint: To write a '1', WBL is driven high (its voltage goes to VDD). c) During a subsequent read operation, what should be the minimum pulse width of RLBAR for a voltage drop of VDD − 2Vtn2 on RBL? Hint: During the read, RBL is pre-charged to VDD before the cell is accessed.
Solution
0 0

Given the following circuit, assuming that all inputs of the circuit shown in Figure 1 below are initially 0 during the precharge phase and that all internal nodes are at 0V: a. Calculate the voltage drop on V0, if A changes to 1 (VDD = 2.5 V) during the evaluate phase. It is given that Vtn = 0.5 V, 2φF = 0.6 V and γ = 0.4 V0.5 . Hint: Don’t forget the body effect. b. Now calculate the voltage drop on Vo if both A and B change to 1 (under the above conditions). c. What is the maximum number of transistors that can be connected in series to M1 and M2 (including M1 and M2, excluding M0 ) if the output should not fall below 0.9 V during the evaluate phase? Assume that each one of the new transistors has the same intrinsic capacitance (to ground) as M1 and M2 (C=10fF).
Solution
1 0