Question

Notify Me Bookmark

10.54 An IC CG amplifier is fed from a signal source with Rsig = ro/2, where ro is the MOSFET output resistance. It has a current-source load with an output resistance equal to ro. The MOSFET is operated at ID = 100 μA and has gm = 2 mA/V, VA = 5 V, Cgs = 0.1 pF, Cgd = 10 fF, and Cdb = 10 fF. As well, the current-source load provides an additional 30 fF capacitance at the output node. Find fH.

10.54 An IC CG amplifier is fed from a signal source with Rsig = ro/2, where ro is the MOSFET output resistance. It has a current-source load with an output resistance equal to ro. The MOSFET is operated at ID = 100 μA and has gm = 2 mA/V, VA = 5 V, Cgs = 0.1 pF, Cgd = 10 fF, and Cdb = 10 fF. As well, the current-source load provides an additional 30 fF capacitance at the output node. Find fH.

Image text
10.54 An IC CG amplifier is fed from a signal source with R sig = r o / 2 , where r o is the MOSFET output resistance. It has a current-source load with an output resistance equal to r o . The MOSFET is operated at I D = 100 μ A and has g m = 2 m A / V , V A = 5 V , C g s = 0.1 p F , C g d = 10 f F , and C d b = 10 f F . As well, the current-source load provides an additional 30 f F capacitance at the output node. Find f H .

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)
  • Correct answers (1)
  • Complete solution (1)
  • Step-by-step solution (1)
  • Fully explained (1)

Similar/Related Questions

An IC CG amplifier is fed from a signal source with Rsig = ro/2, where ro is the MOSFET output resistance. It has a current-source load with an output resistance equal to ro. The MOSFET is operated at ID = 100 μA and has gm = 1.5 mA/V, VA = 10 V, Cgs = 0.2 pF, Cgd = 0.015 pF, and Cd b = 20 fF. As well, the current-source load provides an additional 30 fF capacitance at the output node. Find fH.
Solution
4 0

A MOSFET common-source amplifier has gm = 2.0 mA/V, ro = 100 KΩ, RD = 10 KΩ, Cgs = 2 pF, Cgd = 0.4 pF. The amplifier is fed from a voltage source with an internal resistance of 500 KΩ and the output is connected to a 10 KΩ load. If the lower cutoff frequency (fL) is 10 KHz, find the Gain-bandwidth product of this amplifier in (dB) KHz (ignore the sign). Approximate your answer to 2 decimal point accuracy.

Solution
1 0

Figure 1 shows a single stage common source MOSFET amplifier circuit. We wish to design the circuit to meet the following design specifications: Load Resistance: RL = 100 KΩ Input Resistance: Ri > 200 KΩ Mid-band Gain: Gv = Vo/Vi = −50 ± 20% Supply Voltage: +15 Volts Circuit Capacitors: CG = 10μF; CS = 47μF; CD = 10μF Figure 1. Common Source MOSFET Amplifier Pre-lab: (a) Design the amplifier to meet the specifications above by choosing values for resistors R1, R2, RD and RS. Begin your design by choosing an appropriate value for the bias current ID. If ID ≈ 0.3 mA, assume VT ≈ 1.7 V, Kn ≈ 0.02 A/V2 and VA = 100 V(λ = 0.01 V−1). Find the small signal approximation of the input resistance Rin where Rin = R1∥R2 Find the small signal approximation of the output resistance Ro, where Ro is given as Ro = RD∥RL∥ro. The small signal mid-band gain of the amplifier is given by Gv = −gmRo where gm = 2knID = kn(VGS−VT) Once you choose ID the DC biasing of the transistor can be found using simple rules of thumb. The voltage VG should be approximately equal to VDD/3 > VT. For maximum symmetry, VD should be biased at the midpoint between VD(Max) and VD(Min). Clearly, the maximum VD is VDD and the minimum VD > VG−Vt. For example, if Vt = 1.7 V and VG = 1/3VDD = 5 V, then VD ≈ 9 V for maximum symmetry.

Figure 1 shows a single stage common source MOSFET amplifier circuit. We wish to design the circuit to meet the following design specifications: Load Resistance: RL = 100 KΩ Input Resistance: Ri > 200 KΩ Mid-band Gain: Gv = Vo/Vi = −50 ± 20% Supply Voltage: +15 Volts Circuit Capacitors: CG = 10μF; CS = 47μF; CD = 10μF Figure 1. Common Source MOSFET Amplifier Pre-lab: (a) Design the amplifier to meet the specifications above by choosing values for resistors R1, R2, RD and RS. Begin your design by choosing an appropriate value for the bias current ID. If ID ≈ 0.3 mA, assume VT ≈ 1.7 V, Kn ≈ 0.02 A/V2 and VA = 100 V(λ = 0.01 V−1). Find the small signal approximation of the input resistance Rin where Rin = R1∥R2 Find the small signal approximation of the output resistance Ro, where Ro is given as Ro = RD∥RL∥ro. The small signal mid-band gain of the amplifier is given by Gv = −gmRo where gm = 2knID = kn(VGS−VT) Once you choose ID the DC biasing of the transistor can be found using simple rules of thumb. The voltage VG should be approximately equal to VDD/3 > VT. For maximum symmetry, VD should be biased at the midpoint between VD(Max) and VD(Min). Clearly, the maximum VD is VDD and the minimum VD > VG−Vt. For example, if Vt = 1.7 V and VG = 1/3VDD = 5 V, then VD ≈ 9 V for maximum symmetry.
Solution
1 0