Question

Notify Me Bookmark

11.44. Compute the transfer function of the circuit shown in Fig. 11.84 without using Miller's theorem. Assume λ > 0. Figure 11.84

11.44. Compute the transfer function of the circuit shown in Fig. 11.84 without using Miller's theorem. Assume λ > 0. Figure 11.84

Image text
11.44. Compute the transfer function of the circuit shown in Fig. 11.84 without using Miller's theorem. Assume λ > 0 . Figure 11.84

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

(2) Assume using the non-ideal Op Amp with limited gain and limited bandwidth, and the transfer function is shown below. AOL = Av0(1 + jω ω0) According to the equation, please determine the gain and the bandwidth of the circuit shown in Fig. 1. (Note that the Op Amp is not ideal, so the three principles of an ideal Op Amp may not apply. ) Fig. 1 Non-inverting Amplifier

Solution
0 0

Calculate the transfer function vout(s)/vin(s) for the circuit shown in Fig. P3.3-1. The W/L of M1 is 2 µm/0.8 µm and the W/L of M2 is 4 µm/4 µm. Note that this is a small-signal analysis and the input voltage has a dc value of 2 V.
Solution
0 0

Pass transistor logic (25 pts) Consider the circuit shown in Fig. 1. Assume the inverter has balanced pull-up and pull-down strength. Neglect body effect, short channel effects and parasitic capacitance. VDD = 2.5 V. Assume all transistors in this question have the same size and W = 0.5 um, L = 0.25 um. Use the following parameters. a) (5) What is the logic function implemented by this circuit? b) (5) Identify the input pattern that will cause non-zero static power dissipation (when subthreshold leakage is ignored) for the inverter when inputs A and B are stable. Explain the cause of this static power consumption. c) (8) Compute the static power consumption for the input pattern identified in part b). Ignore subthreshold leakage. c) (7) Show two possible solutions each with 1 additional transistor to avoid static power consumption. Fig. 1

Solution
0 0