Question

Notify Me Bookmark

16.18 For a particular inverter design using a power supply VDD, VOL = 0.1VDD, VOH = 0.8VDD, VIL = 0.25VDD, and VIH = 0.6VDD. What are the noise margins? What is the width of the transition region? For a minimum noise margin of 0.25 V, what value of VDD is required? Show Answer

16.18 For a particular inverter design using a power supply VDD, VOL = 0.1VDD, VOH = 0.8VDD, VIL = 0.25VDD, and VIH = 0.6VDD. What are the noise margins? What is the width of the transition region? For a minimum noise margin of 0.25 V, what value of VDD is required? Show Answer

Image text
16.18 For a particular inverter design using a power supply V D D , V O L = 0.1 V D D , V O H = 0.8 V D D , V I L = 0.25 V D D , and V I H = 0.6 V D D . What are the noise margins? What is the width of the transition region? For a minimum noise margin of 0.25 V , what value of V D D is required? V Show Answer

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

14.3 For a particular inverter design using a power supply VDD, VOL = 0.1VDD, VOH = 0.8VDD, VIL = 0.4VDD, and VIH = 0.6VDD. What are the noise margins? What is the width of the transition region? For a minimum noise margin of 1 V, what value of VDD is required?

Solution
0 0

(a) State the advantages of the CMOS inverter over the NMOS inverter. (b) Realize the following logic function using NMOS & CMOs logic gates. F = (A+B).(C+D).E (c) For a particular logic family for which the supply voltage is V+, VOL = 0.18 V+. VOH = 0.87 V+, VIL = 0.35 V+, and VIH = 0.55 V+. (i) What are the noise margins (NML and NMH)? (ii) What is the width of transition region? (iii) For a maximum noise margin of 2 V, what value of V + is required (d) If VA = 4 V, find Vout for the NMOS inverter shown in figure 5. (Given VT = 1 V and μnCox = 40 μA/V2) (e) If VA = VB = VC = 4 V, find Vout for the 3 input NAND gate shown in Figure 6. (Given VT = 1 V and μnCox = 40 μA/V2)
Solution
0 0

D *14.8 It is required to design a minimum-area pseudoNMOS inverter with equal high and low noise margins using a 2.5−V supply and devices for which |Vt| = 0.5 V, kn′ = 4 kp′ = 120 μA/V2, and the minimum-size device has (W/L) = 1. Use r = 3.2 and show that NML≃NMH. Specify the values of (W/L)n and (W/L)p. What is the static power dissipated in this gate? What is the ratio of propagation delays for low-to-high and high-to-low transitions? For an equivalent load capacitance of 0.1 pF, find tPLH, tPHL, and tP. At what frequency of operation would the static and dynamic power levels be equal? Is this speed of operation possible in view of the tP value you found?
Solution
0 0