Question

Notify Me Bookmark

5.16. The circuit of Fig. 5.115 is designed for a collector current of 0.25 mA. Assume IS = 6×10−16 A, β = 100, and VA = ∞. (a) Determine the required value of R1. (b) What is the error in IC if RE deviates from its nominal value by 5%? Figure 5.115

5.16. The circuit of Fig. 5.115 is designed for a collector current of 0.25 mA. Assume IS = 6×10−16 A, β = 100, and VA = ∞. (a) Determine the required value of R1. (b) What is the error in IC if RE deviates from its nominal value by 5%? Figure 5.115

Image text
5.16. The circuit of Fig. 5.115 is designed for a collector current of 0.25 mA . Assume I S = 6 × 10 − 16 A , β = 100 , and V A = ∞ . (a) Determine the required value of R 1 . (b) What is the error in I C if R E deviates from its nominal value by 5 % ?
Figure 5.115

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

The common-base stage of the following figure is biased with a collector current of 2 mA. Assume IS = 8×10−16 A, β = 100, and VA = ∞. (a) Calculate the voltage gain and I/O impedances of the circuit. (b) How should Vb and RC be chosen to maximize the voltage gain with a bias current of 2 mA?
Solution
0 0

In Figure Q3, a voltage divider biased network for a CE amplifier circuit is shown. The transistor parameters are VBE(on) = 0.7 V, VCE(sat) = 0.2 V, β = 100, and VA = ∞. Figure Q3: CE Amplifier Bias Network (a) What is the advantage of emitter resistor RE ? (b) If VE is maintained at 1 V at the Q-point, estimate the maximum possible swing at the output terminal (vO). Justify your reasons. Determine a suitable DC value for collector voltage to be able to achieve the maximum swing. (c) What are VCEQ and ICQ ? (d) Determine values for R1 and R2. (e) A student has implemented this circuit on a breadboard to test the Q-point before applying AC input signal vI. Measurement results show that the collector voltage is equal to 25 V even though the values of R1, R2, and RE appear to be correct. What could be the reason(s) for this unexpected result? Explain where and what you would check in the circuit.

Solution
0 0

The cascode current source shown in Fig. 9.48 must be designed for a bias current of 0.5 mA. Assume unCox = 100 uA/V2 and VTH = 0.4 V. (a) Neglecting channel-length modulation, compute the required value of Vb2. What is the minimum tolerable value of Vb1 if M2 must remain in saturation? (b) Assuming lambda = 0.1 V-1, calculate the output impedance of the circuit.

Solution
0 0