Question

Notify Me Bookmark

6.10 A series RLC bandpass filter has half-power frequencies at 1 kHz and 10 kHz. If the input impedance at resonance is 6 Ω, what are the values of R, L, and C?

6.10 A series RLC bandpass filter has half-power frequencies at 1 kHz and 10 kHz. If the input impedance at resonance is 6 Ω, what are the values of R, L, and C?

Image text
6.10 A series RLC bandpass filter has half-power frequencies at 1 kHz and 10 kHz . If the input impedance at resonance is 6 Ω , what are the values of R , L , and C ?

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A series RLC circuit has a resonant frequency of 4.42 kHz. When it is driven at 6.10 kHz, it has an impedance of 0.833 kΩ and a phase constant of 39.0∘. What are (a) R, (b) L, and (c) C for this circuit? (a) Number Units (b) Number Units (c) Number Units
Solution
0 0

A series RLC circuit has a resonant frequency of 5.28 kHz. When it is driven at 8.29 kHz, it has an impedance of 1.15 kΩ and a phase constant of 53.0∘. What are (a) R, (b) L, and (c) C for this circuit? (a) Number Units (b) Number Units (c) Number Units
Solution
0 0

a. For the circuit shown below, show a clean and labeled small signal equivalent circuit and derive the expression for vo/vb, (vb is the small signal voltage at the base node) vo/vsig, Rin and Rout. (b) This is the design part. The specifications are as follows: The required gain vo/vb = −120 V/V, Ic = 1 mA. and the require voltage swing at the output is ±3 V around the DC value of the output. (Hint: Do not use the generic design rule. You should be able to find the DC voltages at the collector and emitter from the specifications). Assume Vcc = 8 V. For this design assume VA = ∞ (this makes ro = ∞), V T (Thermal Voltage) = 25 mV, VBE = 0.7 V, VCEsat = 0.3 V and β = ∞. Find the values of RC, RE, RB1, and RB2. (c) If the β = 100 instead of the design value, find the new Ic. Now assuming VA = 50 V find vo/vsig, Rout and RIN. For this part assume Rsig = 10 kΩ. Punt: If you could not answer (b), use RC = 3 kΩ, RE = 2 kΩ, RB1 = 50 kΩ, and RG2 = 30 kΩ (d) Run a transient simulation of the designed circuit in Multisim. Use the same BJT used in the lab simulation. Show the input voltage v sig and output voltage v o on the same plot. Choose vsig to be at 1 kHz and 10 mV peak sinusoidal. Compare with calculated value of the gain in part c.
Solution
0 0