Question

Notify Me Bookmark

9.47 For the circuit shown in Figure P9.47, determine vo(t), where vin (t) is as shown in Figure P9.44. Let β = 120, RB = 10 kΩ, RC1 = RC2 = 1 kΩ, and VCC = 4 V. Figure P9.47

9.47 For the circuit shown in Figure P9.47, determine vo(t), where vin (t) is as shown in Figure P9.44. Let β = 120, RB = 10 kΩ, RC1 = RC2 = 1 kΩ, and VCC = 4 V. Figure P9.47

Image text
9.47 For the circuit shown in Figure P9.47, determine v o ( t ) , where v in ( t ) is as shown in Figure P9.44. Let β = 120 , R B = 10 k Ω , R C 1 = R C 2 = 1 k Ω , and V C C = 4 V . Figure P9.47

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

QUESTION 3 This question examines large signal behaviour of transistor circuits (a) Assume that the MOSFET in Figure 3.1 is operating in saturation and is characterised by a threshold voltage, VT = 1 V. Assume that the parameter, K = 1 mA/V2 where the drain-source current in the MOSFET in saturation is given by equation (3.1). iDS(sat) = K2(vGS−VT)2 Show that the gate-source voltage, vGS, for the circuit shown in Figure 3.1 may be written in terms of the input voltage, vIN, and the output voltage vO, by equation ( 3.2 ): vGS = vINR2 R1+R2 + vOR1 R1+R2 Figure 3.1 (b) For the circuit shown in Figure 3.1, calculate the minimum possible value of output voltage, vO when vIN = 5 V assuming that the MOSFET is maintained in saturation. Assume Rl = R2 = 10 kΩ, and RL = 1 kΩ (c) For the circuit shown in Figure 3.1, determine the value of the constant voltage source, VS, if vO = 4 V when vIN = 5 V and all other circuit parameters are as descirbed in Q3, part (b).

Solution
0 0

For the circuit in the given figure, determine the current IR. Let RB = 30 kΩ, RC1 = 1 kΩ, RC2 = 3 kΩ, R = 27 kΩ, VBB1 = 4 V, VBB2 = 3 V, VCC = 10 V, β1 = 40, and β2 = 60. The current IR is μA.
Solution
0 0

Question: For the AC equivalent circuit of a common-emitter BJT amplifier shown in Figure 1, assume that VCC = 10 V, VBE = 0.7 V, RS = 5 kΩ, RB = 100 kΩ, RL = 1 kΩ, Cb'e = 2 pF, Ccb′ = 1 pF, and CL = 1 pF. Assume bias current IB = 25 μA, Boltzmann's constant k = 1.38×10−23 J/K, q = 1.6 ×10−19 C, T = 300 K, VT = 26 mV, β = 100, rbb' = 100 Ω, and ignore ro. Assuming the equivalent noise bandwidth is 100 kHz, and neglecting the flicker noise and capacitive effect. Note: For the BJT biased on the forward active region: rπ = VT/IB, gm = IC/VT. (a) Calculate the total equivalent input rms noise voltage and current by looking into node a. (b) Calculate the total equivalent input rms noise voltage and current by looking into node b. (c) Discuss if a transformer (with turn ratio I:N) can be incorporated into point b to minimize the total input referred noise? If yes, what is the N to be? Figure 1
Solution
0 0