Question

Notify Me Bookmark

(a+b+c)*d size the transistor so the pull-up and pull-down resistance are match

(a+b+c)*d size the transistor so the pull-up and pull-down resistance are match

Image text
(a+b+c)*d size the transistor so the pull-up and pull-down resistance are match

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

Consider Mirror Adder circuit below: (a) Size NMOS and PMOS devices in the circuit so that the worst-case pull-up and pull-down strength of the circuit is exactly as much as in an inverter. Assume that all the transistors in the circuit and in the inverter have a minimum channel length (LMIN). In the inverter, the width of NMOS is WMIN and PMOS is 2 × WMIN. You can mention sizes in the figure itself. (b) How can you resize transistors from your solution in (a) to make the circuit faster? You are not allowed to increase the total area of your circuit.
Solution
0 0

b) Size the transistors in this gate so that the worst-case on resistance for the pull-up and pull-down networks are the same as that for the static CMOS inverter. c) Size the transistors in this gate so that the best-case on resistance for the pull-up and pull-down networks are the same as that for the static CMOS inverter.

Solution
0 0

Pass transistor logic (25 pts) Consider the circuit shown in Fig. 1. Assume the inverter has balanced pull-up and pull-down strength. Neglect body effect, short channel effects and parasitic capacitance. VDD = 2.5 V. Assume all transistors in this question have the same size and W = 0.5 um, L = 0.25 um. Use the following parameters. a) (5) What is the logic function implemented by this circuit? b) (5) Identify the input pattern that will cause non-zero static power dissipation (when subthreshold leakage is ignored) for the inverter when inputs A and B are stable. Explain the cause of this static power consumption. c) (8) Compute the static power consumption for the input pattern identified in part b). Ignore subthreshold leakage. c) (7) Show two possible solutions each with 1 additional transistor to avoid static power consumption. Fig. 1

Solution
0 0