Question

Notify Me Bookmark

A certain amplifier has an input voltage of 100 mV rms, an input resistance of 100 kohms, and produces an output voltage of 10 V rms across an 8 ohms load resistance. The power supply has a voltage of 15 V and delivers an average current of 2 A. Find the power dissipated in the amplifier and the efficiency of the amplifier. Select one: a. Pd = 10 W and Eff = 41.7% b. Pd = 30 W and Eff = 20% c. Pd = 17.5 W and Eff = 41.7% d. Pd = 17.5 W and Eff = 35.4% e. None of the answers

A certain amplifier has an input voltage of 100 mV rms, an input resistance of 100 kohms, and produces an output voltage of 10 V rms across an 8 ohms load resistance. The power supply has a voltage of 15 V and delivers an average current of 2 A. Find the power dissipated in the amplifier and the efficiency of the amplifier. Select one: a. Pd = 10 W and Eff = 41.7% b. Pd = 30 W and Eff = 20% c. Pd = 17.5 W and Eff = 41.7% d. Pd = 17.5 W and Eff = 35.4% e. None of the answers

Image text
A certain amplifier has an input voltage of 100 m V rms, an input resistance of 100 k o h m s , and produces an output voltage of 10 V rms across an 8 ohms load resistance. The power supply has a voltage of 15 V and delivers an average current of 2 A . Find the power dissipated in the amplifier and the efficiency of the amplifier.
Select one: a. P d = 10 W and E f f = 41.7 % b. P d = 30 W and E f f = 20 % c. P d = 17.5 W and E f f = 41.7 % d. P d = 17.5 W and E f f = 35.4 % e. None of the answers

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

An amplifier has an input resistance of 40 kΩ, an output resistance of 100 Ω, and a short-circuit current gain of 120,000 A/A. The amplifier is connected to a source voltage of 50 mV with a source resistance of Rs = 10 kΩ. The output of the amplifier is connected to a load resistance of 220 Ω. (a) Find current gain, Ai = io ii. (b) Find the voltage gain, Av = vo vi. (c) Find the voltage gain from source to load, Avs = vL vs. (d) Find the power gain, AP = PL PI.

Solution
0 0

For the common drain amplifier the NMOS transistor has VT = 0.45 V, μnCox = 270 μA/V2, W/L = 10, VDD = 1.8 V, and λ = 0.08 V. Neglecting the body effect. The circuit is biased with VG = 1.63 V and IB = 200 μA. (a) Find the DC value at the source terminal. (b) Including the output resistance of current source IB, Find the expression of voltage gain and output resistance. (c) If current source IB has an output resistance of 100 kΩ(RL = ∞), calculate the voltage gain and the output resistance. (d) If current source IB has an output resistance of 100 kΩ and the load of 10 kΩ is also connected, calculate the voltage gain.
Solution
0 0

An NMOS amplifier is shown in Figure 1. Transistor M1 is biased in the saturation region for an amplifier application. The circuit is biased with a resistive voltage divider consisting of R1 and R2, a source degeneration resistor RS, and a load resistor RD. The drain bias current for the design is ID = 500 μA and VDS is 1.625 V. The device parameters are: L = 0.5 μm, W = 10 μm, kn’ = 200 μA/V2, Vtn = 0.5 V, and λn = 0. analyze the frequency response of the amplifier. a) Draw a midband small signal ac equivalent circuit model for the amplifier. For midband you can assume the reactance of Cin is sufficiently low that it is a short circuit. b) Derive an expression for the midband voltage gain transfer function Vout /Vsig. The amplified output signal is taken from the drain terminal and Vout = Vd. Write your gain function in terms of variables only. c) Evaluate the midband gain and calculate a value both in V/V and dB. d) Analyze the frequency response of the input network including the capacitor Cin. Find an expression for the transfer function H1(jω) = Vg/Vsig. e) Evaluate H1(jω) = Vg/Vsig and make a Bode plot of the magnitude of H1(jω). The x-axis is ω (log scale) and the y-axis is the magnitude in dB. f) Use the LTSPICE circuit template and verify the frequency response of the amplifier circuit. Include a copy of the schematic and the frequency response plot. Use 20 points per decade and a frequency span of 0.1 Hz to 100 Hz.
Solution
0 0