Question

Notify Me Bookmark

A CMOS inverter for which kn = 5kp = 200 uA/V2 and Vt = 0.5 V is connected as shown in Fig. P14.34 to a sinusoidal signal source having a Thevenin equivalent voltage of 0.1-V peak amplitude and resistance of 100 k?. What signal voltage appears at node A with vI = +1.5 V? With vI = -1.5 V?

A CMOS inverter for which kn = 5kp = 200 uA/V2 and Vt = 0.5 V is connected as shown in Fig. P14.34 to a sinusoidal signal source having a Thevenin equivalent voltage of 0.1-V peak amplitude and resistance of 100 k?. What signal voltage appears at node A with vI = +1.5 V? With vI = -1.5 V?

Image text
A CMOS inverter for which kn = 5kp = 200 uA/V2 and Vt = 0.5 V is connected as shown in Fig. P14.34 to a sinusoidal signal source having a Thevenin equivalent voltage of 0.1-V peak amplitude and resistance of 100 k?. What signal voltage appears at node A with vI = +1.5 V? With vI = -1.5 V?

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)
  • Correct answers (1)
  • Complete solution (1)
  • Step-by-step solution (1)
  • Fully explained (1)

Similar/Related Questions

D *7.121 The MOSFET in the circuit of Fig. P7.121 has Vt = 0.8 V, kn = 5 mA/V2, and VA = 40 V. (a) Find the values of RS, RD, and RG so that ID = 0.4 mA, the largest possible value for RD is used while a maximum signal swing at the drain of ±0.8 V is possible, and the input resistance at the gate is 10 MΩ. Neglect the Early effect. (b) Find the values of gm and ro at the bias point. (c) If terminal Z is grounded, terminal X is connected to a signal source having a resistance of 1 MΩ, and terminal Y is connected to a load resistance of 10 kΩ, find the voltage gain from signal source to load. (d) If terminal Y is grounded, find the voltage gain from X to Z with Z open-circuited. What is the output resistance of the source follower? Figure P7.121 (e) If terminal X is grounded and terminal Z is connected to a current source delivering a signal current of 50 μA and having a resistance of 100 kΩ, find the voltage signal that can be measured at Y. For simplicity, neglect the effect of ro.D *7.121 The MOSFET in the circuit of Fig. P7.121 has Vt = 0.8 V, kn = 5 mA/V2, and VA = 40 V. (a) Find the values of RS, RD, and RG so that ID = 0.4 mA, the largest possible value for RD is used while a maximum signal swing at the drain of ±0.8 V is possible, and the input resistance at the gate is 10 MΩ. Neglect the Early effect. (b) Find the values of gm and ro at the bias point. (c) If terminal Z is grounded, terminal X is connected to a signal source having a resistance of 1 MΩ, and terminal Y is connected to a load resistance of 10 kΩ, find the voltage gain from signal source to load. (d) If terminal Y is grounded, find the voltage gain from X to Z with Z open-circuited. What is the output resistance of the source follower? Figure P7.121 (e) If terminal X is grounded and terminal Z is connected to a current source delivering a signal current of 50 μA and having a resistance of 100 kΩ, find the voltage signal that can be measured at Y. For simplicity, neglect the effect of ro.
Solution
3 0

Figure P7.33 shows a discrete-circuit amplifier. The input signal vsig is coupled to the gate through a very large capacitor (shown as infinite). The transistor source is connected to ground at signal frequencies via a very large capacitor (shown as infinite). The output voltage signal that develops at the drain is coupled to a load resistance via a very large capacitor (shown as infinite). All capacitors behave as short circuits for signals and as open circuits for dc. (a) If the transistor has Vt = 1 V, and kn = 4 mA/V2 , verify that the bias circuit establishes VGS = 1.5 V, ID = 0.5 mA, and VD = +7.0 V. That is, assume these values, and verify that they are consistent with the values of the circuit components and the device parameters. (b) Find gm and ro if VA = 100 V. (c) Draw a complete small-signal equivalent circuit for the amplifier, assuming all capacitors behave as short circuits at signal frequencies. (d) Find Rin, vgs/vsig, vo/vgs, and vo/vsig.

Figure P7.33 shows a discrete-circuit amplifier. The input signal vsig is coupled to the gate through a very large capacitor (shown as infinite). The transistor source is connected to ground at signal frequencies via a very large capacitor (shown as infinite). The output voltage signal that develops at the drain is coupled to a load resistance via a very large capacitor (shown as infinite). All capacitors behave as short circuits for signals and as open circuits for dc. (a) If the transistor has Vt = 1 V, and kn = 4 mA/V2 , verify that the bias circuit establishes VGS = 1.5 V, ID = 0.5 mA, and VD = +7.0 V. That is, assume these values, and verify that they are consistent with the values of the circuit components and the device parameters. (b) Find gm and ro if VA = 100 V. (c) Draw a complete small-signal equivalent circuit for the amplifier, assuming all capacitors behave as short circuits at signal frequencies. (d) Find Rin, vgs/vsig, vo/vgs, and vo/vsig.
Solution
3 0

It is required to bias the MOSFET amplifier shown in Fig. 1 below at point Q for which VOV,Q = 0.2 V and VDS,Q = 1 V. It is required to bias the MOS amplifier of Fig. 7.3 at point Q for which VOV = 0.2 V and VDS = 1 V. Find the required value of RD when VDD = 5 V, Vt = 0.5 V, and kn = 10 mA/V2. Also specify the coordinates of the VTC end point B. What is the small signal voltage gain of this amplifier? Assuming linear operation, what is the maximum allowable negative signal swing at the output? What is the corresponding positive peak input signal?
Solution
0 0