Question

Notify Me Bookmark

A microphone having a dc level of zero drives a CG stage biased at ID = 0.5 mA. If W/L = 50, μnCox = 100 μA/V2, VTH = 0.5 V, and VDD = 1.8 V, determine the maximum allowable value of RD and hence the maximum voltage gain. Neglect channel-length modulation.

A microphone having a dc level of zero drives a CG stage biased at ID = 0.5 mA. If W/L = 50, μnCox = 100 μA/V2, VTH = 0.5 V, and VDD = 1.8 V, determine the maximum allowable value of RD and hence the maximum voltage gain. Neglect channel-length modulation.

A microphone having a dc level of zero drives a CG stage biased at ID = 0.5 mA. If W/L = 50, μnCox = 100 μA/V2, VTH = 0.5 V, and VDD = 1.8 V, determine the maximum allowable value of RD and hence the maximum voltage gain. Neglect channel-length modulation.

Image text
A microphone having a dc level of zero drives a CG stage biased at ID = 0.5 mA. If W/L = 50, μnCox = 100 μA/V2, VTH = 0.5 V, and VDD = 1.8 V, determine the maximum allowable value of RD and hence the maximum voltage gain. Neglect channel-length modulation.

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

For the following two problems, the supply voltage VDD is 3.3 V, and the MOSFET transistors have VTH = 0.5 V, μnCox = 200 μA/V2, and λ = 0. (a) Design this common-source (CS) amplifier with the following constraints. That is, determine the W/L ratio for the MOSFET transistor (M1) and the resistance values for RD, RE, and R2. −RS = 200 Ω and R1 = 100 kΩThe amplifier must provide a small-signal gain ( = vout/vin) of 10. The maximum power budget is 5 mW. At DC, the voltage drop across RE is 0.5 V. The gate overdrive ( = VGS−VTH) of M1 is 0.2 V. (b) Now design this source-follower (SF) stage driving an 8 Ω speaker. RG is 100 kΩ. Determine the W/L ratio of the transistor M2 and the resistance value RS that bias the transistor at gm = 0.15 Ω−1 and ID = 30 mA. Also, calculate the small-signal gain (AVv = vout /vin ) of this SF stage driving the 8 Ω speaker.

Solution
0 0

Figure 3 shows a differential amplifier circuit. The input common mode level is VCM,in = 0.9 V 'dur. Other parameters are μnCox = 100 μA/V2, λ = 0, VDD = 1.8 V, VTH = 0.4 V. W/L = 50 /0.18, RD = 1 kΩ. 10) The drive voltage in equilibrium (VGS−Vth) = 130.8 mV should be designed as such. What is the required Iss value? a) 0.475 mA b) 0.948 mA c) 0.694 mA d) 0.347 mA e) 1.388 mA 11) What is the maximum RD value that can be connected to keep the transistors in saturation? a) 2.742 kΩ b) 5.474 kΩ c) 3.746 kΩ d) 7.492 kΩ e) 1.873 kΩ 12) Determine the Vin1−Vin2 value that will ensure ID1−ID2 = Iss a) 0.316 V b) 0.158 V c) 0.223 V d) 0.261 V e) 0.185 V13) What is the maximum permissible input common mode voltage level? a) 2.027 V b) 1.962 V c) 1.726 V d) 1.506 V e) 1.853 V 14) Calculate the voltage gain of the differential amplifier. a) 10.68 b) 2.67 c) 3.63 d) 7.29 e) 5.13
Solution
0 0

For the common drain amplifier the NMOS transistor has VT = 0.45 V, μnCox = 270 μA/V2, W/L = 10, VDD = 1.8 V, and λ = 0.08 V. Neglecting the body effect. The circuit is biased with VG = 1.63 V and IB = 200 μA. (a) Find the DC value at the source terminal. (b) Including the output resistance of current source IB, Find the expression of voltage gain and output resistance. (c) If current source IB has an output resistance of 100 kΩ(RL = ∞), calculate the voltage gain and the output resistance. (d) If current source IB has an output resistance of 100 kΩ and the load of 10 kΩ is also connected, calculate the voltage gain.
Solution
0 0