Question

Notify Me Bookmark

A MOSFET common-source amplifier has gm = 2.0 mA/V, ro = 100 KΩ, RD = 10 KΩ, Cgs = 2 pF, Cgd = 0.4 pF. The amplifier is fed from a voltage source with an internal resistance of 500 KΩ and the output is connected to a 10 KΩ load. If the lower cutoff frequency (fL) is 10 KHz, find the Gain-bandwidth product of this amplifier in (dB) KHz (ignore the sign). Approximate your answer to 2 decimal point accuracy.

A MOSFET common-source amplifier has gm = 2.0 mA/V, ro = 100 KΩ, RD = 10 KΩ, Cgs = 2 pF, Cgd = 0.4 pF. The amplifier is fed from a voltage source with an internal resistance of 500 KΩ and the output is connected to a 10 KΩ load. If the lower cutoff frequency (fL) is 10 KHz, find the Gain-bandwidth product of this amplifier in (dB) KHz (ignore the sign). Approximate your answer to 2 decimal point accuracy.

Image text
A MOSFET common-source amplifier has gm = 2.0 mA/V, ro = 100 KΩ, RD = 10 KΩ, Cgs = 2 pF, Cgd = 0.4 pF. The amplifier is fed from a voltage source with an internal resistance of 500 KΩ and the output is connected to a 10 KΩ load. If the lower cutoff frequency (fL) is 10 KHz, find the Gain-bandwidth product of this amplifier in (dB) KHz (ignore the sign). Approximate your answer to 2 decimal point accuracy.

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

An IC CG amplifier is fed from a signal source with Rsig = ro/2, where ro is the MOSFET output resistance. It has a current-source load with an output resistance equal to ro. The MOSFET is operated at ID = 100 μA and has gm = 1.5 mA/V, VA = 10 V, Cgs = 0.2 pF, Cgd = 0.015 pF, and Cd b = 20 fF. As well, the current-source load provides an additional 30 fF capacitance at the output node. Find fH.
Solution
4 0

10.54 An IC CG amplifier is fed from a signal source with Rsig = ro/2, where ro is the MOSFET output resistance. It has a current-source load with an output resistance equal to ro. The MOSFET is operated at ID = 100 μA and has gm = 2 mA/V, VA = 5 V, Cgs = 0.1 pF, Cgd = 10 fF, and Cdb = 10 fF. As well, the current-source load provides an additional 30 fF capacitance at the output node. Find fH.

Solution
1 0

The below BJT common-emitter amplifier with β = 100 is fed with a signal source that has a resistance of 5 kΩ. A load resistor of 5 kΩ is connected to the output of the circuit as shown in the figure. The input resistance of the amplifier is Ri = 2 kΩ and its output resistance is Ro = 5 kΩ. Find the bias current (1), and the small signal parameters. Use VT = 25 mV. If the peak value of Vπ (denoted by V^π ) is to be limited to 5 mV, what are the corresponding peak value of Vsig (denoted by V^sig ) and peak value of V0 (denoted by v^0 ) in presence of the load resistor? Instructions: Use the given input and output resistance values and the equations related to these quantities (from the lecture notes) to find the small signal parameters and the bias current. To find the peak value of vsig, you need to draw the small signal circuit. replace v/with vsig in series with a 5 k resistor. From the signal circuit, find out how Vπ is related to Vsig. Calculate the open loop voltage gain, and use it with the given load resistor value and the voltage amplifier model to find out how V0 is related to Vsig in the presence of the load. You can also solve the signal circuit to find the answer. v^sig = 17.5 mV V^0 = 1.5 V v^0 = 0.4 V
Solution
0 0