Question

Notify Me Bookmark

A nMOS and a pMOS are implemented in the circuit shown below. A, B, and C are set at 0, 6.212, and 1.473 volts (with respect to the GND). What is the potential of D ? Assume that R is large and conduction thresholds are +-2 volts.

A nMOS and a pMOS are implemented in the circuit shown below. A, B, and C are set at 0, 6.212, and 1.473 volts (with respect to the GND). What is the potential of D ? Assume that R is large and conduction thresholds are +-2 volts.

Image text
A nMOS and a pMOS are implemented in the circuit shown below. A, B, and C are set at 0, 6.212, and 1.473 volts (with respect to the GND). What is the potential of D ? Assume that R is large and conduction thresholds are +-2 volts.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Consider the circuit shown below. Assume that both of the transistors are matched, meaning: 1) Kn is the same for both devices M1 and M2, and is equal to 1 mA/V2; 2)VT = 0.5 V for both M1 and M2. Recall that K = Kn(W/L), where W is the length and L is the width of the MOSFET. Further assume that VDD = 3 V and VO is large enough that M2 operates in the saturation regime. a. In what mode does M1 operate and why? b. Find the relationship between IO and IREF in terms of the MOSFET parameters. c. Find VGS if IREF = 10 mA, WI = 10 μm, and LI = 1 μm. d. Find IO under the conditions in part (c) if W2 = 20 μm and L2 = 1 μm. e. What is the minimum value for VO to ensure M2 is in saturation under the conditions of part (d)?
Solution
0 0

Consider the domino circuit in Fig.3. Assuming that all inputs of the circuit shown in Fig.3 are initially Low (0V) during the pre-charge phase and that all internal nodes are at 0V. Ignore all other parasitic capacitance except C1, C2, and C3. It is given that VDD=2.5V, Vtn0=0.5V, 2phif=0.6V and gamma=0.4V^0.5. (25pts) (a) Calculate the voltage drop on Vout (OUT node voltage) if A changes to High (2.5V) during the evaluation phase. (10pts) (Hint: Don't forget the body effect.) (b) Calculate the voltage drop on Vout (OUT node voltage) if both A and B change to High (VDD=2.5V) (5pts). (c) What is the maximum number of transistors that can be connected in series to M1 and M2 (including M1 and M2, excluding M3) if the output should not fall below 0.9V during the evaluation phase? Assume that each one of the new transistors has the same intrinsic capacitance (to ground) as M1 and M2 (C=5fF). (10pts)
Solution
1 0

For the diode circuit shown, what is the output voltage, Vo, in millivolts? Assume that 11 = 15xI2, and the junction area of D2 is 20x as as large as the junction area for D1. Use Vt = kt/q = 26 mV. (Hint: You don't need to know the values for Vcc, I1, I2 or for Is1, Is2. All you need to solve this problem is the ratios given!)
Solution
0 0