Question

Notify Me Bookmark

A practical voltage source consists of an ideal voltage source of value 25 V in series with an internal resistance of 0.25 Ω. A load with resistance of 5 Ω is connected to this source. Determine the measured voltage across the load. A. 23.48 V B. 23.24 V C. 23.81 V D. 24.75 V E. 24.45 V

A practical voltage source consists of an ideal voltage source of value 25 V in series with an internal resistance of 0.25 Ω. A load with resistance of 5 Ω is connected to this source. Determine the measured voltage across the load. A. 23.48 V B. 23.24 V C. 23.81 V D. 24.75 V E. 24.45 V

Image text
A practical voltage source consists of an ideal voltage source of value 25 V in series with an internal resistance of 0.25 Ω. A load with resistance of 5 Ω is connected to this source. Determine the measured voltage across the load. A. 23.48 V B. 23.24 V C. 23.81 V D. 24.75 V E. 24.45 V

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A practical voltage source can be modeled with an ideal voltage source in series with an internal resistance. Assume that a practical source whose ideal voltage source is 19 V and whose internal resistance is 400 mΩ is connected to a load resistance of 9 Ω. Determine the power dissipated in the load resistor to 4 significant figures. A. 38.40 W B. 40.11 W C. 330.9 W D. 361.0 W E. 36.77 W F. None of the other answers is correct.
Solution
0 0

A MOSFET common-source amplifier has gm = 2.0 mA/V, ro = 100 KΩ, RD = 10 KΩ, Cgs = 2 pF, Cgd = 0.4 pF. The amplifier is fed from a voltage source with an internal resistance of 500 KΩ and the output is connected to a 10 KΩ load. If the lower cutoff frequency (fL) is 10 KHz, find the Gain-bandwidth product of this amplifier in (dB) KHz (ignore the sign). Approximate your answer to 2 decimal point accuracy.

Solution
1 0

The below BJT common-emitter amplifier with β = 100 is fed with a signal source that has a resistance of 5 kΩ. A load resistor of 5 kΩ is connected to the output of the circuit as shown in the figure. The input resistance of the amplifier is Ri = 2 kΩ and its output resistance is Ro = 5 kΩ. Find the bias current (1), and the small signal parameters. Use VT = 25 mV. If the peak value of Vπ (denoted by V^π ) is to be limited to 5 mV, what are the corresponding peak value of Vsig (denoted by V^sig ) and peak value of V0 (denoted by v^0 ) in presence of the load resistor? Instructions: Use the given input and output resistance values and the equations related to these quantities (from the lecture notes) to find the small signal parameters and the bias current. To find the peak value of vsig, you need to draw the small signal circuit. replace v/with vsig in series with a 5 k resistor. From the signal circuit, find out how Vπ is related to Vsig. Calculate the open loop voltage gain, and use it with the given load resistor value and the voltage amplifier model to find out how V0 is related to Vsig in the presence of the load. You can also solve the signal circuit to find the answer. v^sig = 17.5 mV V^0 = 1.5 V v^0 = 0.4 V
Solution
0 0