Question

Notify Me Bookmark

A pseudo-NMOS Inverter is utilizing FETs with the following parameters: Vtn = 1V, Vtp = -1V, kn

A pseudo-NMOS Inverter is utilizing FETs with the following parameters: Vtn = 1V, Vtp = -1V, kn

Image text
A pseudo-NMOS Inverter is utilizing FETs with the following parameters: Vtn = 1V, Vtp = -1V, kn

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Figure 3 shows an amplifier with a current mirror as an active load. The MOSFETs have the following parameters: Vtn = −Vtp = 0.6 V, kn′ = 200 μA/V2, kp′ = 65 μA/V2, VA(NMOS) = 20 V, VA(PMOS) = 10 V, VT = 26 mV, R1 = 7 kΩ, R2 = 10 kΩ, L = 0.4 μm and W = 4 μm. The base-emitter forward voltage, VBE, of transistor Q4 is 0.7 V. The forward voltage drop for both D1 and D2 is 0.7 V. The supply voltage, VDD = 3 V. Assume the base current of Q4 is negligible compared to the emitter and collector currents of Q4, with all the transistors biased in the active region. (a) Identify the transistors forming the current mirror. (b) Calculate the value of IREF . (c) Calculate the output resistances of transistors Q1 and Q2.
Solution
0 0

For the CMOS Inverter below, there is a kp is 2 mA/V2 and kn is double the value of kp respectfully. The threshold voltages for each MOSFET are Vtn = 0.5 V and Vtp = −0.5 V. Given Vin = 3.5 V and Vcc = 5 V, find the following parameters: Vout, rdsn, rdsp, IDn, and IDp.
Solution
0 0

Figure 3 Figure 3 shows an amplifier with a current mirror as an active load. The MOSFETs have the following parameters: Vtn = −Vt = 0.6 V, kn′ = 200 μA/V2, kp′ = 65 μA/V2, VA(MMOS) = 20 V, VA(PMOS) = −10 V, VT = 26 mV, R1 = 7 kΩ, R2 = 10 kΩ, L = 0.4 μm and W = 4 μm. The base-emitter forward voltage, VBE, of transistor Q4 is 0.7 V. The forward voltage drop for both D1 and D2 is 0.7 V. The supply voltage, VDO = 3 V. Assume the base current of Q4 is negligible compared to the emitter and collector currents of Q4, with all the transistors biased in the active region. a. ) Given that ID = k′(WL)(VGS − Vt)2, calculate the gate to source voltage of Q1. b. ) Calculate the small-signal voltage gain, vout/vin. .

Solution
0 0