Question

Notify Me Bookmark

A simple current bias reference circuit based on the base-emitter junction voltage is depicted in Figure 9.3. Determine the sensitivity S of the output current to supply voltage VCC. It is given that IS = 5

A simple current bias reference circuit based on the base-emitter junction voltage is depicted in Figure 9.3. Determine the sensitivity S of the output current to supply voltage VCC. It is given that IS = 5

Image text
A simple current bias reference circuit based on the base-emitter junction voltage is depicted in Figure 9.3. Determine the sensitivity S of the output current to supply voltage VCC. It is given that IS = 5

Detailed Answer

4 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (4)
  • Correct answers (3)
  • Complete solution (3)
  • Step-by-step solution (3)
  • Fully explained (3)

Similar/Related Questions

A bias source is depicted in Figure 10.1 where Q2 is twice the size of Q1. The other transistors are the same size as Q1. (a) State the basic mechanism of this bias source. (b) Derive the variation of the fractional temperature coefficient for the output current. (c) Determine the resistance R2 for the current bias reference circuit to obtain an output of 100μA and the resultant TCF at room temperature (T=300 K). Assume that the resistor temperature coefficient is 1500ppm/∘C. [(c) 180Ω, 1800ppm/∘C]

Please answer Q1 part(c)
Solution
3 0

9.34 Determine the sensitivity S of output current lo to supply voltage Vcc for the circuit in Fig. P9.34. S is defined as S = VCC/Io/8Io/8Vcc
Solution
1 0

Consider the circuit shown in Figure 1; note that the numerical value of Vbias is not needed for this problem. Figure 1. Circuit for Problem 1. Here, current source Ibias = 13mA and NMOS devices M1 and M2 have the following properties: • W1 = W2 = 13µm, L1 = L2 = 1µm, kn’ = 500µA/V2 , and VT = 1 V. • The body effect and channel-length modulation effect for devices M1 and M2 should be neglected for this problem. a) If VDD = 5V, determine the numerical value of output current Iout. . Show your work and include appropriate units with your numerical answer. b) If VDD = 5V, determine the numerical value of node voltage Vx. Show your work and include appropriate units with your numerical answer. c) Determine VDDmin, the minimum numerical value of VDD which ensures that device M2 is in saturation. Show your work and include appropriate units with your numerical answer.
Solution
0 0