Question

Notify Me Bookmark

An NMOS transistor is biased in the saturation region at a constant VGS. The drain current is ID = 3 mA at VDS = 5 V and ID = 3.4 mA at VDS = 10 V. Determine λ and ro.

An NMOS transistor is biased in the saturation region at a constant VGS. The drain current is ID = 3 mA at VDS = 5 V and ID = 3.4 mA at VDS = 10 V. Determine λ and ro.

Image text
An NMOS transistor is biased in the saturation region at a constant VGS. The drain current is ID = 3 mA at VDS = 5 V and ID = 3.4 mA at VDS = 10 V. Determine λ and ro.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

An n-channel MOSFET is biased in the saturation region at a constant VGS. (a) The drain current is ID = 0.250 mA at VDS = 1.5 V and ID = 0.258 mA at VDS = 3.3 V. Determine the value of λ and ro. (b) Using the results of part (a), determine ID at VDS = 5 V.
Solution
0 0

An NMOS amplifier is shown in Figure 1. Transistor M1 is biased in the saturation region for an amplifier application. The circuit is biased with a resistive voltage divider consisting of R1 and R2, a source degeneration resistor RS, and a load resistor RD. The drain bias current for the design is ID = 500 μA and VDS is 1.625 V. The device parameters are: L = 0.5 μm, W = 10 μm, kn’ = 200 μA/V2, Vtn = 0.5 V, and λn = 0. analyze the frequency response of the amplifier. a) Draw a midband small signal ac equivalent circuit model for the amplifier. For midband you can assume the reactance of Cin is sufficiently low that it is a short circuit. b) Derive an expression for the midband voltage gain transfer function Vout /Vsig. The amplified output signal is taken from the drain terminal and Vout = Vd. Write your gain function in terms of variables only. c) Evaluate the midband gain and calculate a value both in V/V and dB. d) Analyze the frequency response of the input network including the capacitor Cin. Find an expression for the transfer function H1(jω) = Vg/Vsig. e) Evaluate H1(jω) = Vg/Vsig and make a Bode plot of the magnitude of H1(jω). The x-axis is ω (log scale) and the y-axis is the magnitude in dB. f) Use the LTSPICE circuit template and verify the frequency response of the amplifier circuit. Include a copy of the schematic and the frequency response plot. Use 20 points per decade and a frequency span of 0.1 Hz to 100 Hz.
Solution
0 0

Enhancement-mode NMOS and PMOS devices both have parameters L = 4 µm and tox = 500 A0 . For the NMOS transistor, VT N = 0.6 V, µn = 675 cm2/V - s, and the channel width is Wn for the PMOS transistor, VTP = -0.6 V, µP = 375 cm2/V -s, and the channel width is WP. Design the widths of the two transistors such that they are electrically equivalent and the drain current in the PMOS transistor is ID = 0.8 mA when it is biased in the saturation region at VSG = 5 V. What are the values of Kn, KP, Wn, and WP?
Solution
0 0