Question

Notify Me Bookmark

An op amp with parameters as listed is used in the circuit shown above. In this question, calculate the worst-case maximum error voltage, VO,ERROR, at the output due to the input bias currents only: OV ± 198mV ± 126mV ± 99mV Op-amp Parameters: AOL = ∞ V/V VOS = 12.5 mV IB = 4 0nA IOS = 10 nA ft = 2 MHz

An op amp with parameters as listed is used in the circuit shown above. In this question, calculate the worst-case maximum error voltage, VO,ERROR, at the output due to the input bias currents only: OV ± 198mV ± 126mV ± 99mV Op-amp Parameters: AOL = ∞ V/V VOS = 12.5 mV IB = 4 0nA IOS = 10 nA ft = 2 MHz

Image text
An op amp with parameters as listed is used in the circuit shown above. In this question, calculate the worst-case maximum error voltage, VO,ERROR, at the output due to the input bias currents only: OV ± 198mV ± 126mV ± 99mV Op-amp Parameters: AOL = ∞ V/V VOS = 12.5 mV IB = 4 0nA IOS = 10 nA ft = 2 MHz

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

An op amp with parameters as listed is used in the circuit shown above. Calculate the worst-case maximum error voltage, VO ERROR, at the output due to the input offset voltage only: 0 V ± 75mV ± 60mV ± 10 mV ± 30 mV Op-amp Parameters: AOL = ∞ V/V VOS = 5 mV IB = 50 nA IOS = 10 nA ft = 2 MHz.
Solution
0 0

In this question, an op amp is used to amplify the audio output from a music player and drive a pair of headphones, as shown. Find the maximum circuit gain (vo/vi) that can be used while simultaneously achieving a circuit 3-dB bandwidth of at least 100 kHz. 20 V/V 50 V/V 100 V/V 75 V/V 10 V/V Op-amp parameters: Ao = 2x10^5 V/V ft = 10 MHz Slew Rate = ∞ V/µs vo max = ± 14V
Solution
0 0

In this question, choose values for R2 and R1 in the above circuit so that output signal is an undistorted sine wave of 10 volts peak amplitude. The op amp is characterized by the device parameters listed to the right of the circuit. R2, R1 values: 20 Ω, 1 Ω 400 Ω, 10 Ω 2 kΩ, 50 Ω 40 Ω, 1Ω 1 kΩ, 50 Ω Op-amp Parameters: vOMAX = ±23 V iOMAX = ±10 mA ft = 5MHz SR = 10 V/μs
Solution
0 0