Question

Notify Me Bookmark

Assume M1-M2 and M3-M4 are matched Assume transistor model as transconductance (gmn) and output resistance (Routn) only (ignore body effect and any parasitic capacitances)Calculate the voltage gain of the amplifier Calculate the input-referred noise of the amplifier

Assume M1-M2 and M3-M4 are matched Assume transistor model as transconductance (gmn) and output resistance (Routn) only (ignore body effect and any parasitic capacitances)Calculate the voltage gain of the amplifier Calculate the input-referred noise of the amplifier

Image text
Assume M 1 ⋅ M 2 and M 3 ⋅ M 4 are matched Assume transistor model as transconductance ( g m n ) and output resistance ( R outn ) only (ignore body effect and any parasitic capacitances)
  1. Calculate the voltage gain of the amplifier
  2. Calculate the input-refered noise of the amplifier

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Problem 1: Consider a MOS cascode amplifier with active load in Fig. 1 μnCox = 400 μA/V2 μpCox = 200 μA/V2 NMOS transistors M1 and M2 are matched: (W/L)1 = (W/L)2 = 1 μm/10 nm PMOS transistors M3 and M4 are matched: (W/L)3 = (W/L)4 = 2 μm/10 nm All transistors Are biased to operated in their saturation region. The bias current ID is ID = 2 mA Ignore body effect. λn = λp = 0.05 V−1 Question 1. Calculate the overall equivalent transconductance Fig. 1 Question 2. Calculate the equivalent output resistance Question 3. Calculate the voltage gain
Solution
0 0

Emitter follower: The figure below shows a common base amplifier using an NPN BJT which has a common emitter current gain of β = 200, and a base-emitter voltage of VBE = 0.7 V. Ignore the Early effect, i.e. take VA = ∞. The resistor values are RE = 4.7 kΩ, RB1 = 43 kΩ and RB2 = 56 kΩ. The supply voltages are ±5 V. The collector current is IC ≅ 1 mA. a) Draw the small-signal equivalent circuit b) Calculate the transistor's small signal transconductance gm, and the small signal input resistance rπ. c) Calculate the unloaded voltage gain, Avo, input resistance Rin and output resistance Rout of the amplifier. d) What are the loaded voltage gain, Av and overall gain Gv if Rsig = 1kΩ and RL = 1kΩ?
Solution
3 0

Given the differential amplifier below. All transistors have the minimum gate length of 0.18 μm. The mobility of NMOS and PMOS are 0.065 m2/Vs and 0.025 m2/Vs. The threshold voltages are 0.6 V and −0.6 V. The supply voltage is 1.8 V. The Early voltages for NMOS and PMOS are 80 MV/m and 40 MV/m. The current IsS is set at 1 mA. a. Estimate the specific capacitance of the gate oxide (per m2). b. Add a circuit to generate the bias current Is5 from a reference current c. Which transistors could suffer bulk effect and draw the bulk connections. d. Choose a suitable value for the resistors. e. Choose a suitable bias voltage for the inputs. f. Choose suitable widths for the transistors. g. Derive an expression for the frequency-dependent (differential) gain of the circuit where you take into account the output load capacitance (CL on either side) and the parasitic capacitance parallel to and output resistance of the tail current source. h. Derive an expression for the frequency-dependent CMRR of your circuit taking into account the same parasitic capacitors and where you assume the transconductances from M1 and M2 are slightly different as well as the resistors RD1 and RD2. i. Derive an expression for the frequency-dependent PSRR of your circuit taking into account the same parasitic capacitors and where you assume the transconductances from M1 an M2 are slightly different as well as the resistors RD1 and RD2.

Solution
0 0