Question

Notify Me Bookmark

Assume that R2 = 9 kΩ. Determine Iout due only to the current source I1 and the voltage source V2. A. Due to I1, Iout = 22.5 mA and due to V2, Iout = -1.5 mA B. Due to I1, Iout = 1.5 mA and due to V2, Iout = 22.5 mA C. Due to I1, Iout = 5 mA and due to V2, Iout = 16 mA D. Due to I1, Iout = 25.5 mA and due to V2, Iout = 1.5 mA E. Due to I1, Iout = 16 mA and due to V2, Iout = 5 mA F. None of the other answers is correct.

Assume that R2 = 9 kΩ. Determine Iout due only to the current source I1 and the voltage source V2. A. Due to I1, Iout = 22.5 mA and due to V2, Iout = -1.5 mA B. Due to I1, Iout = 1.5 mA and due to V2, Iout = 22.5 mA C. Due to I1, Iout = 5 mA and due to V2, Iout = 16 mA D. Due to I1, Iout = 25.5 mA and due to V2, Iout = 1.5 mA E. Due to I1, Iout = 16 mA and due to V2, Iout = 5 mA F. None of the other answers is correct.

Image text
Assume that R2 = 9 kΩ. Determine Iout due only to the current source I1 and the voltage source V2. A. Due to I1, Iout = 22.5 mA and due to V2, Iout = -1.5 mA B. Due to I1, Iout = 1.5 mA and due to V2, Iout = 22.5 mA C. Due to I1, Iout = 5 mA and due to V2, Iout = 16 mA D. Due to I1, Iout = 25.5 mA and due to V2, Iout = 1.5 mA E. Due to I1, Iout = 16 mA and due to V2, Iout = 5 mA F. None of the other answers is correct.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

For all circuits, do not consider channel length modulation for calculating bias points. Unless otherwise specified, channel length modulation effect needs to be considered for small-signal analysis. All answers should be given to the second decimal place. Circuit and device parameters are: Vdd = 5 V;VTn = VTp = 1 V; μnCox = 50 μA/V2; μpCox = 25 μA/V2; λn = λp = 0.01 V−1; Lmin = 1 μm Figure 1 (for problems 1-3) Figure 2 (for problems 5-9) Figure 1: Transistor M1 has (W/L) = (160 μm/2 μm) and a bias current Iout = 2 mA. We desire M1 to be in saturation. You should assume λn = 0 for problems (1)-(3). Determine the ratio R1 /R2 required. 1 point Let VTn increase by 10% to 1.1 V. What is the new value of Iout in mA ? 1 point Let μnCox increase by 10% to 55 μA/V2. What is the new value of Iout in mA ? 1 point Figure 2: The circuit has Iref = 2 mA and Vp = 4 V. Transistors M1, M2 and M3 have (W/L) = (80 μm/1 μm). Determine the value of vx. (in volts) 1 point Determine the minimum allowable value of Vb (in volts) such that all devices are in saturation. 1 point Determine the maximum allowable value of Vb (in volts) such that all devices are in saturation. 1 point Determine Vb (in volts) such that vX = VY. 1 point determine the output resistance of this circuit ∂Vp/∂Iout in MΩ. 1 point Description for questions 9-10: An NMOS device with ID = 1 mA must operate in saturation with drain-source voltages as low as 0.5 V. The minimum required small-signal output impedance is 400 kQ. {Hint: You need to use the relations: rout = 1 /(λ⋅ID); λ⋅L = constant; and expression for VDS, sat = VGS−VT} Determine the length of the device in μm. 1 point Determine the width of the device in μm. 1 point

Solution
0 0

For all circuits, do not consider channel length modulation for calculating bias points. Unless otherwise specified, channel length modulation effect needs to be considered for small-signal analysis. All answers should be given to the second decimal place. Circuit and device parameters are: Vdd = 5 V; VTnn = VTp = 1 V; μnCox = 50 μA/V2; μpCox = 25 μA/V2; λn = λp = 0.01 V−1; Lmin = 1 μm Figure 1 (for problems 1-3) Figure 2 (for problems 5-9) Figure 1: Transistor M1 has (W/L) = (160 μm/2 μm) and a bias current Iout = 2 mA. We desire M1 to be in saturation. You should assume λn = 0 for problems (1)-(3). Determine the ratio R1 /R2 required. 1 point Let VTn increase by 10% to 1.1 V. What is the new value of Iout in mA ? 1 point Let μnCox increase by 10% to 55 μA/V2. What is the new value of Iout in mA ? 1 point Figure 2: The circuit has Iref = 2 mA and VP = 4 V. Transistors M1, M2 and M3 have (W/L) = (80 μm/1 μm). Determine the value of vx. (in volts) 1 point Determine the minimum allowable value of Vb (in volts) such that all devices are in saturation. 1 point Determine the maximum allowable value of Vb (in volts) such that all devices are in saturation. 1 point Determine Vb (in volts) such that VX = VY. 1 point determine the output resistance of this circuit ∂Vp/Iout in MQ. 1 point Description for questions 9-10: An NMOS device with ID = 1 mA must operate in saturation with drain-source voltages as low as 0.5 V. The minimum required small-signal output impedance is 400 kΩ. {Hint: You need to use the relations: rout = 1 /(λ⋅ID); λ⋅L = constant; and expression for VDS, sat = VGS−VT }Determine the length of the device in μm. 1 point Determine the width of the device in μm. 1 point

Solution
0 0

Assume that Is = 6 mA. Determine the mesh currents I1 and I2. A. I1 = 6.2 mA, I2 = 6 mA B. I1 = 1.2 mA, I2 = -6 ma C. I1 = -1 mA, I2 = -6 mA D. I1 = -6 mA, I2 = -1 mA E. I1 = -3 mA, I2 = -5 mA F. None of the other answers is correct.
Solution
0 0