Question

Notify Me Bookmark

Assuming gm1 = gm2 = 0.5 mS, RC = 200 kΩ, RE = 300 kΩ, and VA1 = VA2 = ∞ the common mode gain Acm can be obtained as 50 V/V 100 V/V 0.66 V/V 0 V/V 0.33 V/V

Assuming gm1 = gm2 = 0.5 mS, RC = 200 kΩ, RE = 300 kΩ, and VA1 = VA2 = ∞ the common mode gain Acm can be obtained as 50 V/V 100 V/V 0.66 V/V 0 V/V 0.33 V/V

Image text
Assuming g m 1 = g m 2 = 0.5 m S , R C = 200 k Ω , R E = 300 k Ω , and V A 1 = V A 2 = ∞ the common mode gain A c m can be obtained as 50 V / V 100 V / V 0.66 V / V 0 V / V 0.33 V / V

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

For the common-emitter amplifier shown in Figure 1 , let VCC = 9 V, R1 = 27 kΩ, R2 = 15 kΩ, RE = 1.2 kΩ, and RC = 2.2 kΩ. The transistor has β = 100, VT = 25 mV, VA = ∞ and VBE = 0.7 V. Calculate the DC bias current IE. If the amplifier operates between a source for which RS = 10 kΩ and a load of 2 kΩ, replace the transistor with its hybrid- π model, and find the values of Ri and the voltage gain v0/vs. Figure 1
Solution
0 0

a. For the circuit shown below, show a clean and labeled small signal equivalent circuit and derive the expression for vo/vb, (vb is the small signal voltage at the base node) vo/vsig, Rin and Rout. (b) This is the design part. The specifications are as follows: The required gain vo/vb = −120 V/V, Ic = 1 mA. and the require voltage swing at the output is ±3 V around the DC value of the output. (Hint: Do not use the generic design rule. You should be able to find the DC voltages at the collector and emitter from the specifications). Assume Vcc = 8 V. For this design assume VA = ∞ (this makes ro = ∞), V T (Thermal Voltage) = 25 mV, VBE = 0.7 V, VCEsat = 0.3 V and β = ∞. Find the values of RC, RE, RB1, and RB2. (c) If the β = 100 instead of the design value, find the new Ic. Now assuming VA = 50 V find vo/vsig, Rout and RIN. For this part assume Rsig = 10 kΩ. Punt: If you could not answer (b), use RC = 3 kΩ, RE = 2 kΩ, RB1 = 50 kΩ, and RG2 = 30 kΩ (d) Run a transient simulation of the designed circuit in Multisim. Use the same BJT used in the lab simulation. Show the input voltage v sig and output voltage v o on the same plot. Choose vsig to be at 1 kHz and 10 mV peak sinusoidal. Compare with calculated value of the gain in part c.
Solution
0 0

QUESTION 10: The circuit parameters for diff-amp shown in Figure 11.30 are V+ = 6 V, V− = −6 V, and IQ = 0.52 mA. The transistor parameters are β = 66, VA1 = VA2 = 105 V, VA3 = VA4 = 75 V, and VA5 = ∞. Determine the open-circuit differential-mode voltage gain. What is the output resistance of the diff-amp? Find the value of load resistance RL that reduces the differential-mode gain to 74 percent of the open-circuit value. Ad (open circuit) Format : 4622.5359058583 Ro(kΩ) Format : 782.54629054754 RL(kΩ) Format : 948.8308389362 Figure 11.30
Solution
0 0