Question

Notify Me Bookmark

Assuming the current flowing through R2 is one-tenth of ID1, calculate the values of R1 and R2 so that ID1 = 0.5 mA. μnCox = 200 μA/V2, W/L = 20 /0.18, VTH = 0.4 V, and λ = 0.

Assuming the current flowing through R2 is one-tenth of ID1, calculate the values of R1 and R2 so that ID1 = 0.5 mA. μnCox = 200 μA/V2, W/L = 20 /0.18, VTH = 0.4 V, and λ = 0.

Image text
Assuming the current flowing through R 2 is one-tenth of I D 1 , calculate the values of R 1 and R 2 so that I D 1 = 0.5 m A . μ n C o x = 200 μ A / V 2 , W / L = 20 / 0.18 , V T H = 0.4 V , and λ = 0 .

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Below figure depicts a cascode current source whose value is defined by the mirror arrangement, M1−M2. Assume W/L = 4,3 μm/0,18 μm for M1−M3. Select the minimum tolerable value of Vb so that Iout is equal to 0.5 mA. Circuit parameters / Devre Parametreleri μnCox = 200 μA/V2, VTH = 0.4 V, λ = 0. a. 1.56 V b. 0.96 V c. 0,56 V d. 2,06 V e. 1,31 V f. 0,76 V g. 1,16 V
Solution
0 0

For the following two problems, the supply voltage VDD is 3.3 V, and the MOSFET transistors have VTH = 0.5 V, μnCox = 200 μA/V2, and λ = 0. (a) Design this common-source (CS) amplifier with the following constraints. That is, determine the W/L ratio for the MOSFET transistor (M1) and the resistance values for RD, RE, and R2. −RS = 200 Ω and R1 = 100 kΩThe amplifier must provide a small-signal gain ( = vout/vin) of 10. The maximum power budget is 5 mW. At DC, the voltage drop across RE is 0.5 V. The gate overdrive ( = VGS−VTH) of M1 is 0.2 V. (b) Now design this source-follower (SF) stage driving an 8 Ω speaker. RG is 100 kΩ. Determine the W/L ratio of the transistor M2 and the resistance value RS that bias the transistor at gm = 0.15 Ω−1 and ID = 30 mA. Also, calculate the small-signal gain (AVv = vout /vin ) of this SF stage driving the 8 Ω speaker.

Solution
0 0

Calculate the drain current of M1 (a) without considering channel-length modulation, (b) including channel-length modulation. Assume μnCox = 200 μA/V2, W/L = 10 /0.18, and VTH = 0.4 V, λ = 0.1 V−1.
Solution
0 0