Question

Notify Me Bookmark

Calculate the fall time for the below model of CMOS under High to Low transition. Given that the value of Vout is given by the following equation: Vout = VDDe −t/RnCL (where VDD, Rn and CL are 5 V, 100 Ω and 100 pF respectively). Also, assume that the boundaries of LOW and HIGH levels are 1.5 V and 3.5 V respectively. Give your answer in terms of nanoseconds (ns) and rounded to 2 decimal places.

Calculate the fall time for the below model of CMOS under High to Low transition. Given that the value of Vout is given by the following equation: Vout = VDDe −t/RnCL (where VDD, Rn and CL are 5 V, 100 Ω and 100 pF respectively). Also, assume that the boundaries of LOW and HIGH levels are 1.5 V and 3.5 V respectively. Give your answer in terms of nanoseconds (ns) and rounded to 2 decimal places.

Image text
Calculate the fall time for the below model of CMOS under High to Low transition. Given that the value of V out is given by the following equation: V out = V D D e − t / R n C L (where V D D , R n and C L are 5 V , 100 Ω and 100 pF respectively). Also, assume that the boundaries of LOW and HIGH levels are 1.5 V and 3.5 V respectively. Give your answer in terms of nanoseconds (ns) and rounded to 2 decimailfplaces.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Question 3 (25 points) A particular logic inverter has VDD = 5 V, VSS = 0 V, VH = 4.8 V, VL = 0.1 V, VOH = 4.5 V, VIH = 3.5 V, VOL = 0.5 V, VIL = 1 V, and VM = 2.3 V. For simplicity, I will represent the VTC as f(x). For example, the value of the output voltage when the input voltage is 1 V is given by f(1). At which values of input will the slope of the VTC be -1? (Select all that apply; wrong answers are penalized.) 0.5 1 3.5 4.5 None of the above Question 4 (25 points) A particular logic inverter has VDD = 5 V, VSS = 0 V, VH = 4.8 V, VL = 0.1 V, VOH = 4.5 V, VIH = 3.5 V, VOL = 0.5 V, VIL = 1 V, and VM = 2.3 V. Determine the noise margin for the low input, NML. Enter your answer in V rounded to one decimal place. Your Answer: Answer

Solution
2 0

Problem 3: (Short Circuit Power Consumption) For the circuit in Figure 2, assume that the input Vin is a periodic square wave signal (called "clock") of frequency 200 MHz, and has a rising transition time (from 0−100% of VDD ) of 0.2 ns and a falling transition time (from 100−0% of VDD ) of 0.2 ns. For the inverter in the figure, find the short circuit power consumption. Use the procedural hints listed below. Procedural Hints:Calculate the short circuit duration, tsc. Short circuit currents occur when both nMOS and pMOS transistors are simultaneously ON. Use the rise/fall times given. Calculate the peak short circuit currents. For simplicity assume that Ipeak_sc_LH and Ipeak_sc_HL are equal, and calculate the latter only. To calculate Ipeak_sc_HL, , assume that the short circuit current for the H-to-L transition peaks when Vin = VDD/2 and Vout = 9 VDD /10 (this is an arbitrary choice assumed for this problem alone). Now calculate the pMOS transistor current - this will be Ipeak_sc_HL. . Question: Does the nMOS current equal the pMOS current? If not, how do you account for InMOS−IpMO ? Using your results from (1) and (2), calculate the short circuit power dissipation. Note: Assume that VDD = 1.0 Volts, (W/L)p = 3.5 /0.1, and (W/L)n = 2 /0.1. Transistor properties are given by the 90 nm model parameters handout posted on the class web-site. For the current calculation, use the transistor parameters (not the equivalent resistance parameters) and ignore channel length modulation. Assume that there is an 89 fF load on Out.

Solution
0 0

For the circuit shown in Figure 2, VDD = 5 V, and transistors M1 and M2 have properties µnCox = 200µA/V2, (W/L) = 10, Vt0 = 0.7 V, and λ = 0. You may neglect the body effect below, unless you are specifically asked to consider it. Figure 2. Circuit for Problem 2. a) Draw the circuit above, and label the drain, gate, source, and bulk nodes for both transistors, using labels VD1, VG1, VS1, and VB1 for the drain, gate, source, and bulk nodes of device M1, respectively, and similarly for M2. In total, there should be 8 labels in your schematic. For this part, assume the transistors are in saturation. b) Determine the valid input range for the circuit under consideration; that is, determine the range on the input voltage Vin such that transistors M1 and M2 are operating in the saturation region. Note that, in your analysis, you are not constrained to Vin values between 0 V and VDD, inclusive; e.g., if Vin = 100 V keeps both of the transistors in saturation, then Vin = 100 V should be included in your range of valid input voltages. Your answer to this part should take the form Vin,low ≤ Vin ≤ Vin,high ; hopefully, it is obvious that you are being asked to provide numerical answers for the lower- and upper-bounds Vin,low and Vin,high , respectively. c) For the valid input range that you determined in part (b), determine the corresponding output voltage range; that is, determine Vout,low ≤ Vout ≤ Vout,high when the input is constrained to Vin,low ≤ Vin ≤ Vin,high. . As before, you should report numerical values for the lower- and upper-bounds Vout,low and Vout,high, , respectively. d) Determine the "on voltage" VON2 (or, as in the Sedra/Smith textbook, the "overdrive voltage") and drain current ID2 of transistor M2 over the range of valid input voltages. Also, determine the drain current ID1 of M1 over the valid input range. e) If you were to consider it, would any of the transistors in the circuit above be affected by the body effect? If "yes," then list the device (or, devices, as the case may be). Qualitatively speaking, how would your answers to parts (b) and (c) change if you were to take the body effect into account? Explain your reasoning.
Solution
0 0