Question

Notify Me Bookmark

Calculate the total charge stored in the channel of an NMOS transistor under the following conditions: CoX =10fF/um2, W=5um, L=0.1um, and VGS -VTH=1 V. Assume VDS =0. An NMOS transistor conducts 1 mA when VGS-VTH=0.6V and 1.6 mA when VGS - VTH =0.8 V. Calculate VDS and W/L if the transistor is operating in the triode region. Determine the operating region of M1 in each of the circuits shown in Figure 1.

Calculate the total charge stored in the channel of an NMOS transistor under the following conditions: CoX =10fF/um2, W=5um, L=0.1um, and VGS -VTH=1 V. Assume VDS =0. An NMOS transistor conducts 1 mA when VGS-VTH=0.6V and 1.6 mA when VGS - VTH =0.8 V. Calculate VDS and W/L if the transistor is operating in the triode region. Determine the operating region of M1 in each of the circuits shown in Figure 1.

Image text
Calculate the total charge stored in the channel of an NMOS transistor under the following conditions: CoX =10fF/um2, W=5um, L=0.1um, and VGS -VTH=1 V. Assume VDS =0. An NMOS transistor conducts 1 mA when VGS-VTH=0.6V and 1.6 mA when VGS - VTH =0.8 V. Calculate VDS and W/L if the transistor is operating in the triode region. Determine the operating region of M1 in each of the circuits shown in Figure 1.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Consider MOSFET-based current source circuits shown below. Assume that the n-type MOSFET transistors follow the long-channel model with μnCox = 100 μA/V2 and Vth,n = 0.5 V. All the transistors have a fixed channel length L = 0.25 μm. The bias voltage VB1 is at 0.8 V. Assume that all transistors have no back-bias effect. (1) (2) (a) For a basic current source in Fig. (1), size the NMOS transistor M1's width ( = W1) so that it conducts a current of 1 mA when it operates in saturation region. You may assume λn = 0. (b) What is the minimum value of Vout for this circuit that keeps M1 in saturation region? (c) For a cascode current source in Fig. (2), assume that the transistor M2 has the same width with M1 you determined from part (a). Determine the value of VB2 that yields the lowest minimum VOUT keeping both M1 and M2 in saturation regions. (d) Now, let's assume that the transistors M1 and M2 have a finite output resistance with λn = 0.1 V−1. Compute the value of the output resistance (Rout) of this cascode current source when M1 and M2 are in the saturation region. (Hint: Calculate the output impedance in a small signal equivalent circuit.)
Solution
0 0

The current in an NMOS transistor is 0.5 mA when VGS - VTN = 0.6 V and 1.0 mA when VGS - VTN = 1.0 V. The device is operating in the nonsaturation region. Determine VDS and Kn.
Solution
1 0

2. The p-channel MOSFET circuit with terminal voltages is shown in Figure 9. Answer the following questions by using given device data. (a) Label and indicate value for the source and the drain terminals. (4 marks) (b) Identify in which region the transistor is operating. Prove your answer by showing the calculation. (6 marks) (c) Calculate the drain current, - ID, (4 marks) (d) Determine the new operating region when the applied source, VS is change to 4V. Assume the source-bulk voltage, VSB is not zero. (6 marks)
Solution
1 0