Question

Notify Me Bookmark

Consider that transistors Q1 and Q2 are identical in Fig. 12. Those MOSFETs have Vtn = 0.5V and kn = 1.6 mA/V^2. Design the circuit given below such a way so that the value of R2 should make Q2 to operate at the edge of the saturation region.

Consider that transistors Q1 and Q2 are identical in Fig. 12. Those MOSFETs have Vtn = 0.5V and kn = 1.6 mA/V^2. Design the circuit given below such a way so that the value of R2 should make Q2 to operate at the edge of the saturation region.

Image text
Consider that transistors Q1 and Q2 are identical in Fig. 12. Those MOSFETs have Vtn = 0.5V and kn = 1.6 mA/V^2. Design the circuit given below such a way so that the value of R2 should make Q2 to operate at the edge of the saturation region.

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

Another MOSFET Q2 is added to the circuit of question one as shown below. Both Q1 and Q2 are identical with Vth = 0.5 V, unCox = 0.4 mA/V^2, and W / L = 4. Find the value of R2 that results in Q2 to operate at the edge of the saturation region.
Solution
1 0

Design the fully differential amplifier stage shown in figure below; where Rp = 100Ω, represent some parasitic resistance of metal traces. The mismatch percentage in the drain resistances is given as 5%. The differential amplifier stage should have a power budget of 3.6 mW and a common-mode rejection ration (CMRR) of 40000. Neglect channel length modulation for M1, and M2 only. a) Find the differential pair M1 and M2 aspect ratio (W/L). b) Given (W/L)3 = (W/L)4 = 10; and (W/L)5 = 20 for M3, M4 and M5 respectively. Find the required biasing voltages Vb1, and Vb2. Consider that these devices operate at the edge of saturation. c) Find the output common-mode gain (Acm-cm). Consider the following: λp = 2λn = 0.2 V-1. μnCox = μpCox = 250 μA/V2. Vtn = 0.4 V, and Vtp = -0.5 V. M1 and M2 are identical. M3 and M4 are identical.
Solution
0 0

For the circuit in Fig. E5.10, assume that Q1 and Q2 are matched except for having different widths, W1 and W2. Let Vt = 0.5 V, k’n = 0.4 mA/V2, L1 = L2 = 0.36 μm, W1 = 1.44 μm, and λ = 0. (a) Find the value of R required to establish a current of 50 μA in Q1. (b) Find W2 andR2 so thatQ2 operates at the edge of saturation with a current of 0.5 mA Figure E5.10

For the circuit in Fig. E5.10, assume that Q1 and Q2 are matched except for having different widths, W1 and W2. Let Vt = 0.5 V, k’n = 0.4 mA/V2, L1 = L2 = 0.36 μm, W1 = 1.44 μm, and λ = 0. (a) Find the value of R required to establish a current of 50 μA in Q1. (b) Find W2 andR2 so thatQ2 operates at the edge of saturation with a current of 0.5 mA Figure E5.10

Solution
2 0