Question

Notify Me Bookmark

Consider the circuit of Fig. 5.56 for the case VDD = VSS = 10 V, I = 0.5 mA, RG = 4.7 MΩ, RD = 15 kΩ, Vt = 1.5 V, and kn′(W/L) = 1 mA/V2. Find VOV, VGS, VG, VS, and VD. Also, calculate the values of gm and ro, assuming that VA = 75 V. What is the maximum possible signal swing at the drain for which the MOSFET remains in saturation?

Consider the circuit of Fig. 5.56 for the case VDD = VSS = 10 V, I = 0.5 mA, RG = 4.7 MΩ, RD = 15 kΩ, Vt = 1.5 V, and kn′(W/L) = 1 mA/V2. Find VOV, VGS, VG, VS, and VD. Also, calculate the values of gm and ro, assuming that VA = 75 V. What is the maximum possible signal swing at the drain for which the MOSFET remains in saturation?

Consider the circuit of Fig. 5.56 for the case VDD = VSS = 10 V, I = 0.5 mA, RG = 4.7 MΩ, RD = 15 kΩ, Vt = 1.5 V, and kn′(W/L) = 1 mA/V2. Find VOV, VGS, VG, VS, and VD. Also, calculate the values of gm and ro, assuming that VA = 75 V. What is the maximum possible signal swing at the drain for which the MOSFET remains in saturation?

Image text
Consider the circuit of Fig. 5.56 for the case VDD = VSS = 10 V, I = 0.5 mA, RG = 4.7 MΩ, RD = 15 kΩ, Vt = 1.5 V, and kn′(W/L) = 1 mA/V2. Find VOV, VGS, VG, VS, and VD. Also, calculate the values of gm and ro, assuming that VA = 75 V. What is the maximum possible signal swing at the drain for which the MOSFET remains in saturation?

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)
  • Correct answers (1)
  • Complete solution (1)
  • Step-by-step solution (1)
  • Fully explained (1)

Similar/Related Questions

Example 9: Given VDD = VSS = 10 V, kn = 1 mA/V2, I = 0.5 mA, RD = 15 kΩ, RG = 4.7 MΩ Vt = 1.5 V, VA = 75 V. Calculate input, output resistance and overall voltage gain. Rsig = 100 kΩ, RL = 15 kΩ.
Solution
3 0

D *7.121 The MOSFET in the circuit of Fig. P7.121 has Vt = 0.8 V, kn = 5 mA/V2, and VA = 40 V. (a) Find the values of RS, RD, and RG so that ID = 0.4 mA, the largest possible value for RD is used while a maximum signal swing at the drain of ±0.8 V is possible, and the input resistance at the gate is 10 MΩ. Neglect the Early effect. (b) Find the values of gm and ro at the bias point. (c) If terminal Z is grounded, terminal X is connected to a signal source having a resistance of 1 MΩ, and terminal Y is connected to a load resistance of 10 kΩ, find the voltage gain from signal source to load. (d) If terminal Y is grounded, find the voltage gain from X to Z with Z open-circuited. What is the output resistance of the source follower? Figure P7.121 (e) If terminal X is grounded and terminal Z is connected to a current source delivering a signal current of 50 μA and having a resistance of 100 kΩ, find the voltage signal that can be measured at Y. For simplicity, neglect the effect of ro.D *7.121 The MOSFET in the circuit of Fig. P7.121 has Vt = 0.8 V, kn = 5 mA/V2, and VA = 40 V. (a) Find the values of RS, RD, and RG so that ID = 0.4 mA, the largest possible value for RD is used while a maximum signal swing at the drain of ±0.8 V is possible, and the input resistance at the gate is 10 MΩ. Neglect the Early effect. (b) Find the values of gm and ro at the bias point. (c) If terminal Z is grounded, terminal X is connected to a signal source having a resistance of 1 MΩ, and terminal Y is connected to a load resistance of 10 kΩ, find the voltage gain from signal source to load. (d) If terminal Y is grounded, find the voltage gain from X to Z with Z open-circuited. What is the output resistance of the source follower? Figure P7.121 (e) If terminal X is grounded and terminal Z is connected to a current source delivering a signal current of 50 μA and having a resistance of 100 kΩ, find the voltage signal that can be measured at Y. For simplicity, neglect the effect of ro.
Solution
3 0

Figure P7.33 shows a discrete-circuit amplifier. The input signal vsig is coupled to the gate through a very large capacitor (shown as infinite). The transistor source is connected to ground at signal frequencies via a very large capacitor (shown as infinite). The output voltage signal that develops at the drain is coupled to a load resistance via a very large capacitor (shown as infinite). All capacitors behave as short circuits for signals and as open circuits for dc. (a) If the transistor has Vt = 1 V, and kn = 4 mA/V2 , verify that the bias circuit establishes VGS = 1.5 V, ID = 0.5 mA, and VD = +7.0 V. That is, assume these values, and verify that they are consistent with the values of the circuit components and the device parameters. (b) Find gm and ro if VA = 100 V. (c) Draw a complete small-signal equivalent circuit for the amplifier, assuming all capacitors behave as short circuits at signal frequencies. (d) Find Rin, vgs/vsig, vo/vgs, and vo/vsig.

Figure P7.33 shows a discrete-circuit amplifier. The input signal vsig is coupled to the gate through a very large capacitor (shown as infinite). The transistor source is connected to ground at signal frequencies via a very large capacitor (shown as infinite). The output voltage signal that develops at the drain is coupled to a load resistance via a very large capacitor (shown as infinite). All capacitors behave as short circuits for signals and as open circuits for dc. (a) If the transistor has Vt = 1 V, and kn = 4 mA/V2 , verify that the bias circuit establishes VGS = 1.5 V, ID = 0.5 mA, and VD = +7.0 V. That is, assume these values, and verify that they are consistent with the values of the circuit components and the device parameters. (b) Find gm and ro if VA = 100 V. (c) Draw a complete small-signal equivalent circuit for the amplifier, assuming all capacitors behave as short circuits at signal frequencies. (d) Find Rin, vgs/vsig, vo/vgs, and vo/vsig.
Solution
3 0