Question

Notify Me Bookmark

Consider the CMOS Circuit shown below. The MOSFET parameters are kn’ = 3kp’ = 0.3 mA/V2, and VT = 0.7 V, and RX = 1 kΩ. a) Find the drain current ID = Correct Answer: .25 mA b) The region of operation of the NMOS transistor is Correct Answer: Triode, Linear c) The region of operation of the PMOS transistor is Correct Answer: Active, Saturation

Consider the CMOS Circuit shown below. The MOSFET parameters are kn’ = 3kp’ = 0.3 mA/V2, and VT = 0.7 V, and RX = 1 kΩ. a) Find the drain current ID = Correct Answer: .25 mA b) The region of operation of the NMOS transistor is Correct Answer: Triode, Linear c) The region of operation of the PMOS transistor is Correct Answer: Active, Saturation

Image text
Consider the CMOS Circuit shown below. The MOSFET parameters are kn’ = 3kp’ = 0.3 mA/V2, and VT = 0.7 V, and RX = 1 kΩ. a) Find the drain current ID = Correct Answer: .25 mA b) The region of operation of the NMOS transistor is Correct Answer: Triode, Linear c) The region of operation of the PMOS transistor is Correct Answer: Active, Saturation

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A common-source amplifier is shown below. The MOSFET parameters are k'n = 2mA/V2, VT = 0.8 V. The amplifier is biased with a source VDD = 5 V, and resistors RD = 4 kohm, RS = 1 kohm, RG1 = 225 kohm, RG2 = 175 kohm, Vov = 0.75 V (a) Calculate the drain current ID. Recall the formula for a MOSFET in saturation: ID = 1/2k'n(VGS - VT)2 (b) Obtain the MOSFET voltage vDS. (c) Using small-signal analysis, obtain the voltage gain vo/vi for RL = 12 kohm. Assume ro = 100 kohm, gm = 1 mA/V.

Solution
1 0

Device Level A cross section view of an MOS device is shown in Figure 1. (a) What type is this device (NMOS or PMOS)? (b) Considering the potential of each terminal in this figure, determine Source, Drain, Gate, and Substrate terminals and label them on the diagram. (c) Assuming that |Vt| = 0.5 V and VDSat = 1 V. Find the region of operation of the device (cutoff, linear, saturation, or velocity saturation). Ignore body effect. (d) Determine drain current if |K′|(W/L) = 1 mA/V2, (W/L) = 10, and |λ| = 0.1 V−1. Figure 1 Biased MOSFET Transistor

Solution
0 0

A CMOS amplifier is shown in Figure 3. PMOS transistors M1 and M2 have μpCox = 60 μA/V2, Vtp = −0.4 V, |1/λp| = 100 V, W = 240 μm and L = 1.6 μm. The NMOS transistor M0 has parameters μnCox = 90 μA/V2, Vtn = 0.4 V, 1/λn = 100 V, W = 160 μm and L = 1.6 μm. VDD = 5 V and Rref = 100 kΩ. Figure 3 (i) Calculate the current flowing in the reference resistor Rref . (ii) Sketch Vo as a function of Vi, indicating the regions of operation of the transistors. (iii) Calculate the small-signal voltage gain vo/vi when M0 and M1 are biased in their saturated regions of operation. (iv) If the DC and small-signal components of Vi and Vo are denoted ViQ, VoQ and vi, vo respectively, what value of voltage ViQ is required to give ID0Q = 45 μA? To simplify the calculation, you may neglect channel length modulation effects. (v) Calculate the numerical value of the small-signal voltage gain vo/vi when ViQ has the value derived in part (iv).
Solution
0 0