Question

Notify Me Bookmark

Consider the current mirror shown in Figure 3, where Iin = 100 μA, each transistor has W/L = 10 μm/0.2 μm and Rs = 1 kΩ. Using the 0.18 μm CMOS devices in Table 1, find rout for the current mirror. Assume the body effect can be approximated by gbs = 0.15gm. Take Id as : Id = μnCox 2(W L)(Vgs − VT) 2 Figure 3

Consider the current mirror shown in Figure 3, where Iin = 100 μA, each transistor has W/L = 10 μm/0.2 μm and Rs = 1 kΩ. Using the 0.18 μm CMOS devices in Table 1, find rout for the current mirror. Assume the body effect can be approximated by gbs = 0.15gm. Take Id as : Id = μnCox 2(W L)(Vgs − VT) 2 Figure 3

Image text
Consider the current mirror shown in Figure 3, where I i n = 100 μ A , each transistor has W / L = 10 μ m / 0.2 μ m and R s = 1 k Ω . Using the 0.18 μ m CMOS devices in Table 1, find rout for the current mirror. Assume the body effect can be approximated by g b s = 0.15 g m . Take I d as :
I d = μ n C o x 2 ( W L ) ( V E s − V T ) 2
Figure 3

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

In the circuit of Figure 2, prove that the gain expression of the amplifier is given by : Av = −gm(rds1∥rds) I bias is generated by a current mirror acting as a load. Determine the required Ibias to get the gain of the stage as 15. All transistors have W/L = 12 μm/0.5 μm, rΔ = 1 /λID and device parameters are those of 0.35 μm CMOS process in Table 1. Find the resulting effective gate-source voltage, Veff. Take Id as : Id = μnCox 2 (W L)(Vgs − VT)2 Figure 2
Solution
0 0

Consider the current mirror depicted in Fig. 2 where Iin = 100 μA, R = 2 kΩ, and each transistor has W/L = 10 μm/0.4 μm. Given the 0.35 μm CMOS device parameters in Table 1.5 , what drain voltage at Q2 will ensure that Iin is precisely equal to Iout?
Solution
0 0

Current Mirrors (35 points) This problem introduces current mirrors, which will be covered in more details in future lectures. Consider the circuit shown below (Figure 2). (W/L)1 = 1, (W/L)2 = 5, Rref = 50 kΩ, ignore channel length modulation unless otherwise stated. Assume L1 = L2 = 1 μm. Figure 2 a) (5 points) Assume RL = 10 kΩ. Calculate IL, the current flowing through RL. What is the current mirroring ratio ( IL over Iref , where Iref is the current through Rref )? We want the current mirror to provide a load-independent current as much as possible, so check that M2 is in saturation. b) (5 points) Determine the maximum RL and minimum VOut such that the current mirror still functions with the same current mirroring ratio you calculated in part a). Hint: for the current mirror to function as desired, transistor saturation should be maintained. c) (5 points) Channel length modulation introduces load-dependent errors in the mirroring ratio. Using λ = 0.1 V−1 for L = 1 μm, estimate the percentage error in the mirroring ratio. Here, set RL to its maximum value you got in part b ), and assume that we want the same IL as in parts a) and b). Hint: what should be the new VX and Iref ? d) (4 points) Compute the output resistance, Rout, , looking into the drain of M2. Use λ = 0.1 V−1 and assume the same IL as in parts a) through c). e) (5 points) Now consider redesigning the previous current mirror with source-degenerated transistors as shown in Figure 3. Ignore channel length modulation and body effect ( Assume bulk is tied to source). Transistor sizes remain the same, (WL)1 = 1 and (WL)2 = 5. This circuit has been designed to have the same Iref as in part a). What should the value of Rs2 be if we want the same current mirroring ratio as in a)? f) (5 points) Similarly to part b, determine the maximum RL and minimum VOut such that the current mirror still functions with the same current mirroring ratio as in part e). g) (4 points) Now compute the output resistance, Rout , looking into the drain of M2 (using λ = 0.1 V−1 ). Assume IL as used in parts e) and f ). h) (2 points) Comparing the minimum output voltage and the output resistance of these two current mirrors, comment on the advantages and disadvantages of using source degeneration in a current mirror. Figure 3 Current Mirrors (35 points) This problem introduces current mirrors, which will be covered in more details in future lectures. Consider the circuit shown below (Figure 2). (W/L)1 = 1, (W/L)2 = 5, Rref = 50 kΩ, ignore channel length modulation unless otherwise stated. Assume L1 = L2 = 1 μm. Figure 2 a) (5 points) Assume RL = 10 kΩ. Calculate IL, the current flowing through RL. What is the current mirroring ratio ( IL over Iref , where Iref is the current through Rref )? We want the current mirror to provide a load-independent current as much as possible, so check that M2 is in saturation. b) (5 points) Determine the maximum RL and minimum VOut such that the current mirror still functions with the same current mirroring ratio you calculated in part a). Hint: for the current mirror to function as desired, transistor saturation should be maintained. c) (5 points) Channel length modulation introduces load-dependent errors in the mirroring ratio. Using λ = 0.1 V−1 for L = 1 μm, estimate the percentage error in the mirroring ratio. Here, set RL to its maximum value you got in part b ), and assume that we want the same IL as in parts a) and b). Hint: what should be the new VX and Iref ? d) (4 points) Compute the output resistance, Rout, , looking into the drain of M2. Use λ = 0.1 V−1 and assume the same IL as in parts a) through c). e) (5 points) Now consider redesigning the previous current mirror with source-degenerated transistors as shown in Figure 3. Ignore channel length modulation and body effect ( Assume bulk is tied to source). Transistor sizes remain the same, (WL)1 = 1 and (WL)2 = 5. This circuit has been designed to have the same Iref as in part a). What should the value of Rs2 be if we want the same current mirroring ratio as in a)? f) (5 points) Similarly to part b, determine the maximum RL and minimum VOut such that the current mirror still functions with the same current mirroring ratio as in part e). g) (4 points) Now compute the output resistance, Rout , looking into the drain of M2 (using λ = 0.1 V−1 ). Assume IL as used in parts e) and f ). h) (2 points) Comparing the minimum output voltage and the output resistance of these two current mirrors, comment on the advantages and disadvantages of using source degeneration in a current mirror. Figure 3

Solution
0 0