Question

Notify Me Bookmark

Consider the following analog sinusoidal signal: xa(t) = 3sin(100πt) (a) Sketch the signal xa(t) for 0 ≤ t ≤ 30 ms. (b) The signal xa(t) is sampled with a sampling rate Fs = 300 samples/s. Determine the frequency of the discrete-time signal x(n) = xa(nT), T = 1/Fs, and show that it is periodic. (c) Compute the sample values in one period of x(n). Sketch x(n) on the same diagram with xa(t). What is the period of the discrete-time signal in milliseconds? (d) Can you find a sampling rate Fs such that the signal x(n) reaches its peak value of 3? What is the minimum Fs suitable for this task?

Consider the following analog sinusoidal signal: xa(t) = 3sin(100πt) (a) Sketch the signal xa(t) for 0 ≤ t ≤ 30 ms. (b) The signal xa(t) is sampled with a sampling rate Fs = 300 samples/s. Determine the frequency of the discrete-time signal x(n) = xa(nT), T = 1/Fs, and show that it is periodic. (c) Compute the sample values in one period of x(n). Sketch x(n) on the same diagram with xa(t). What is the period of the discrete-time signal in milliseconds? (d) Can you find a sampling rate Fs such that the signal x(n) reaches its peak value of 3? What is the minimum Fs suitable for this task?

Image text
Consider the following analog sinusoidal signal:
x a ( t ) = 3 sin ⁡ ( 100 π t )
(a) Sketch the signal x a ( t ) for 0 ≤ t ≤ 30 m s .
(b) The signal x a ( t ) is sampled with a sampling rate F s = 300 samples/s. Determine the frequency of the discrete-time signal x ( n ) = x a ( n T ) , T = 1 / F s , and show that it is periodic.
(c) Compute the sample values in one period of x ( n ) . Sketch x ( n ) on the same diagram with x a ( t ) . What is the period of the discrete-time signal in milliseconds?
(d) Can you find a sampling rate F s such that the signal x ( n ) reaches its peak value of 3 ? What is the minimum F s suitable for this task?

Detailed Answer

2 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (2)
  • Correct answers (2)
  • Complete solution (2)
  • Step-by-step solution (2)
  • Fully explained (2)

Similar/Related Questions

Consider MOSFET-based current source circuits shown below. Assume that the n-type MOSFET transistors follow the long-channel model with μnCox = 100 μA/V2 and Vth,n = 0.5 V. All the transistors have a fixed channel length L = 0.25 μm. The bias voltage VB1 is at 0.8 V. Assume that all transistors have no back-bias effect. (1) (2) (a) For a basic current source in Fig. (1), size the NMOS transistor M1's width ( = W1) so that it conducts a current of 1 mA when it operates in saturation region. You may assume λn = 0. (b) What is the minimum value of Vout for this circuit that keeps M1 in saturation region? (c) For a cascode current source in Fig. (2), assume that the transistor M2 has the same width with M1 you determined from part (a). Determine the value of VB2 that yields the lowest minimum VOUT keeping both M1 and M2 in saturation regions. (d) Now, let's assume that the transistors M1 and M2 have a finite output resistance with λn = 0.1 V−1. Compute the value of the output resistance (Rout) of this cascode current source when M1 and M2 are in the saturation region. (Hint: Calculate the output impedance in a small signal equivalent circuit.)
Solution
0 0

For the circuit shown in Figure 1, NMOS device M1 has the following properties: kn’(W/L) = 180 μA/V2, VT0 = 2 V, λ = 0.02 V-1, γ = 0.4 V1/2, 2ϕF = 0.7 V, and ID = 10 mA. Note that capacitor Cbig is a DC blocking cap, i.e., Cbig is an open at DC and a short at all other frequencies. Figure 1. Circuit for Problem 1. a) Determine the numerical value of bias voltage Vbias which is needed to achieve a drain current of ID = 10 mA. b) Draw the small-signal equivalent circuit. c) Analyze the small-signal circuit to find Rin, Rout, and Av = Vout/Vin. Find the analytic expression for each quantity first, before determining the numerical answers. d) Recall that gmb/gm = χ. Determine the numerical value of χ for this problem. [Note that this part has nothing to do with parts (b) and (c).] e) What is the threshold voltage of device M1? [Note that this part has nothing to do with parts (b) and (c).] Show your work, list all numerical values in proper engineering notation format with appropriate units and with at least two decimal places of precision.
Solution
0 0

2.1 A discrete-time signal x(n) is defined as x(n) = { 1 + n/3, -3 ≤ n ≤ -1 1, 0 ≤ n ≤ 3 0, elsewhere (a) Determine its values and sketch the signal x(n). (b) Sketch the signals that result if we: 1. First fold x(n) and then delay the resulting signal by four samples. 2. First delay x(n) by four samples and then fold the resulting signal. (c) Sketch the signal x(-n + 4). (d) Compare the results in parts (b) and (c) and derive a rule for obtaining the signal x(-n + k) from x(n). (e) Can you express the signal x(n) in terms of signals δ(n) and u(n) ?
Solution
2 0