Question

Notify Me Bookmark

Consider the following enhancement MOSFET circuit. The transistor is tested in the laboratory and following results are obtained: VGS(ON) = 2V and ID(ON) = 1 mA. The threshold voltage is also found to be VTH = 1.5 Volts. Find ID, VGS and VDS.

Consider the following enhancement MOSFET circuit. The transistor is tested in the laboratory and following results are obtained: VGS(ON) = 2V and ID(ON) = 1 mA. The threshold voltage is also found to be VTH = 1.5 Volts. Find ID, VGS and VDS.

Image text
Consider the following enhancement MOSFET circuit. The transistor is tested in the laboratory and following results are obtained: VGS(ON) = 2V and ID(ON) = 1 mA. The threshold voltage is also found to be VTH = 1.5 Volts. Find ID, VGS and VDS.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Consider the following enhancement MOSFET circuit. The transistor is tested in the laboratory and following results are obtained: VGS(ON)=2V and ID(ON)=1 mA. The threshold voltage is also found to be VTH=1.5 Volts. Find ID, VGS and VDS.
Solution
0 0

Q5. An amplifier is to be constructed using a n-channel enhancement type MOSFET which has a conduction parameter of k = 50 mA/V2 and a threshold voltage VTH = 1.8 V. Given that RD = 420 Ω, determine the answers for the following questions (20 marks) Figure Q5 a) Design the values of the resistors, R1, R2 and RS, required to bias the MOSFET amplifier at VG = 5 V and drain current at ID = 16 mA. (6 marks) b) Compute the values of VGS and VDS. (6 marks) c) Sketch the transfer curve and DC load line of the circuit and define the Q-point, VTH, VGSO, ID(max) and IDQ points on the graph. (8 marks)
Solution
0 0

You are asked to design an NMOS inverter with a resistive load, as shown in Figure 2.e, with the input voltage of either 0 V (logic level 0) or 3.3 V (logic level 1). The transistor is an n-channel enhancement type MOSFET with a threshold voltage of VT = 1.5 V, an aspect ratio (W/L) of 20 , and a gate capacitor per unit area of 400 nF/cm2. The electron mobility is 500 cm2 /Vs. When the input is at logic level 1 (vi = 3.3 V), the transistor is in the linear region. Find the values of VDD and RD to have the output voltage of 0.3 V at logic level 0 and 3.3 V at logic level 1. Figure 2. e.
Solution
0 0