Question

Notify Me Bookmark

Consider the MOS device shown in the picture below. a) Consider that VGS > VT of the transistor. In which region of operation is the MOSFET operating? b) Given transistor parameters VT = 0.8 V and beta = 0.1 mA/V2, find out VGS and ID.

Consider the MOS device shown in the picture below. a) Consider that VGS > VT of the transistor. In which region of operation is the MOSFET operating? b) Given transistor parameters VT = 0.8 V and beta = 0.1 mA/V2, find out VGS and ID.

Image text
Consider the MOS device shown in the picture below. a) Consider that VGS > VT of the transistor. In which region of operation is the MOSFET operating? b) Given transistor parameters VT = 0.8 V and beta = 0.1 mA/V2, find out VGS and ID.

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)
  • Correct answers (1)
  • Complete solution (1)
  • Step-by-step solution (1)
  • Fully explained (1)

Similar/Related Questions

The technology parameters are: λ(NMOS) = λ(PMOS) = 0 V−1;γ = 0, VDD = 3.3 V, VTH(NMOS) = |VTH (PMOS)| = 0.5 V, μnC0 x = 0.1 mA/V2, μpCox = 0.05 mA/V2, and C0 x = 5 fF/μm2. Assuming the transistor sizes are: L1 = 0.5 μm, L2 = 4 μm, W1 = 5 μm, and W2 = 20 μm, and furthermore, Vbies = 0.8 V : a) What is the region of operation of each transistor? [8 marks] b) If the input signal, Vin , is a step function with a small magnitude of 10 mV (i. e. , Vin abruptly changes from 0 V to 10 mV at time t = 0 ), what is Vout (t) for t ≥ 0 ? [12 marks] Note: If you need to consider a device capacitance, only take into account the gate

Solution
0 0

Device Level A cross section view of an MOS device is shown in Figure 1. (a) What type is this device (NMOS or PMOS)? (b) Considering the potential of each terminal in this figure, determine Source, Drain, Gate, and Substrate terminals and label them on the diagram. (c) Assuming that |Vt| = 0.5 V and VDSat = 1 V. Find the region of operation of the device (cutoff, linear, saturation, or velocity saturation). Ignore body effect. (d) Determine drain current if |K′|(W/L) = 1 mA/V2, (W/L) = 10, and |λ| = 0.1 V−1. Figure 1 Biased MOSFET Transistor

Solution
0 0

(a) State the advantages of the CMOS inverter over the NMOS inverter. (b) Realize the following logic function using NMOS & CMOs logic gates. F = (A+B).(C+D).E (c) For a particular logic family for which the supply voltage is V+, VOL = 0.18 V+. VOH = 0.87 V+, VIL = 0.35 V+, and VIH = 0.55 V+. (i) What are the noise margins (NML and NMH)? (ii) What is the width of transition region? (iii) For a maximum noise margin of 2 V, what value of V + is required (d) If VA = 4 V, find Vout for the NMOS inverter shown in figure 5. (Given VT = 1 V and μnCox = 40 μA/V2) (e) If VA = VB = VC = 4 V, find Vout for the 3 input NAND gate shown in Figure 6. (Given VT = 1 V and μnCox = 40 μA/V2)
Solution
0 0