Question

Notify Me Bookmark

Construct a 32K×8 memory system using 2K×8 RAM chip. Suggest a schematic for this memory system to be connected to a general microprocessor as shown in Figure 1. Explain the operation of writing and reading data to and from the memory system. (14 marks) Figure 1

Construct a 32K×8 memory system using 2K×8 RAM chip. Suggest a schematic for this memory system to be connected to a general microprocessor as shown in Figure 1. Explain the operation of writing and reading data to and from the memory system. (14 marks) Figure 1

Image text
Construct a 32 K × 8 memory system using 2 K × 8 RAM chip. Suggest a schematic for this memory system to be connected to a general microprocessor as shown in Figure 1. Explain the operation of writing and reading data to and from the memory system. (14 marks) Figure 1

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

The figure shows the schematic of a bit line in a single transistor DRAM memory. Assume that the bit line has 4096 (4K) such cells connected to it in each column, and that each cell is 1 μm×μm. Take the transistor diffusion junction capacitance contributing to the bit line capacitance for each cell to be 0.5 femtofarads (femto = 10−15 ) and the metal-over field oxide bit line capacitance to be 0.05 ferntofarads per sq μm. (a) Assuming a 0.25 μm wide bit line, (i. e. 0.25 μm technology), estimate the bit line capacitance for this memory. (b) If the bit line capacitance is C2, estimate C1 to achieve a 100 millivolt change on the bit line precharged to 1 volt when reading out a high stored in the cell (on C1) operating off a 2 volt supply. (i. e. C1 is initially charged to 2 volts before the transistor is turned on for readout. )

Solution
0 0

Consider the open-loop circuit (on the left) and closed-loop circuit (on the right) shown in Figure 1 below. In this problem, the open-loop circuit (on the left) will be used to analyze the open-loop behavior of the closed-loop circuit (on the right). closed - loof ciruit Figure 1. Open-loop (left) and closed-loop (right) circuits for Problem 1. Here are the problem parameters:The NMOS devices have gmn = 6 mA/V and rdsn = 25 kΩ. The PMOS devices have gmp = 3 mA/V and rdsp = 15 kΩ. Resistor values are R1 = 1 kΩ and R2 = 3 kΩ. a) Referring to the open-loop circuit of Figure 1, determine the numerical open-loop gain Av. OL = Vout /Vin . For the purposes of this analysis, as we have done a million times before (reminder: this is the 2 nd semester of electronics, so this should not be your first electronics rodeo), you should deactivate all sources in the circuit, except Vin. . b) Referring to the open-loop circuit of Figure 1, determine the numerical open-loop output resistance Rout, oL. , i. e. , the resistance seen looking in at the output node Vout. . You should deactivate all sources in the circuit; feel free to add an appropriate test source(s), if you think you need to do that. c) Referring to the open-loop circuit of Figure 1, determine the numerical loop gain from the test source to the output node: LG = |Vout /Vtest | For the purposes of this analysis, you should deactivate all sources in the circuit, except Vtest. . Also, note that the way the loop gain is defined, it will be a positive-valued quantity. Explain why we want to use a positive loop gain for determining the closed-loop performance [see, e. g. , parts (d) and (e) below]. Your answer for this part should be both i) specific to this problem and ii) generalized to any closed-loop circuit with negative feedback. You are strongly encouraged to consider incorporating a generalized block diagram to help strengthen your argument(s). d) Referring to the closed-loop circuit of Figure 1, determine the numerical closed-loop gain Av, CL = Vout /Vin . Rather than solving the closed-loop circuit of Figure 1 directly for the closed-loop gain, you should instead utilize the results of the previous parts to determine Av, cL. Here, I need to remind you that you should do as you have been (hopefully) doing on the previous parts: first, state the equation you will use to determine Av, cL in terms of, e. g. , Av. ol. and/or Rout, ol and/or LG (i. e. , resist the temptation to dive straight into the numerical values, but feel free to write your equation in terms of Av, ol and/or Rout, ol. and/or LG instead of gmn, gmp, rdsn, rdpp , R1, R2 ), and then plug the numbers in to your equation, and then box your numerical answer along with all the things that we have expected of your numerical quantities since day one. Make it really easy for me to find the equation you used (same story for all of the parts of this problem). e) Referring to the closed-loop circuit of Figure 1, determine the numerical closed-loop output resistance Rout, CL. Rather than solving the closed-loop circuit of Figure 1 directly for the closed-loop output resistance, you should instead follow the same guidance that was given for part (d) of this problem.

Solution
0 0

A suspended platform of negligible mass is connected to the floor below by a long vertical spring of force constant k = 1200 N/m. A circus performer of mass m = 70 kg falls from rest onto the platform from a height of h = 5.8 m above it, as shown below. Initially, the spring is not compressed or stretched. For this problem, define your system to consist of the person, platform, spring, and Earth, and you should take the reference point y = 0 to be the initial height of the platform. Part (a) Determine the total mechanical energy for this system. Is it conserved? Defend your reasoning. Part (b) As the performer falls, consider the following two segments of their descent: (i) from the moment the performer starts moving until they reach the platform, and (ii) from the moment they start compressing the platform until they reach a maximum compression. For each of two segments, describe what happens to the kinetic energy, gravitational potential energy, and spring potential energy in the system. You should be specific about what forms of energy are present and how they are being converted from one to another.
Solution
0 0