Question

Notify Me Bookmark

D16.58 (a) Given inputs A, B, C, D, and E, design a CMOS circuit to implement the logic function Y

 

D16.58 (a) Given inputs A, B, C, D, and E, design a CMOS circuit to implement the logic function YD16.58 (a) Given inputs A, B, C, D, and E, design a CMOS circuit to implement the logic function Y

Image text
D16.58 (a) Given inputs A, B, C, D, and E, design a CMOS circuit to implement the logic function Y

Detailed Answer

2 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (2)

Similar/Related Questions

You are given a CMOS logic circuit for which the pull-up network with PMOS transistors has been provided below. (a) Complete the pull-down network with NMOS transistors. (b) For the NMOS transistors in the pull-down network, we'll label the one that uses A, B, C, and D as input as M5, M6, M7, M8, respectively. If inputs A and B are at logic 0 and C and D are at logic 1, determine which of the transistors (M1~M8) are ON and which are OFF. (c) Determine the logic function that is implemented by this CMOS logic circuit.
Solution
0 0

Please design a CMOS circuit that realizes the following logic function with a 5V logics. Z = (AB+C)D+E. a) Using static CMOS circuits with fewest number of transistors. b) For the following device parameters, unCox = 45u A/V2 , upCox = 20u A/V2 VTN = 1 V , VTP = -1.2 V. Use all Wn/Ln = 10u/1u for NMOS transistors and L= 1 um for PMOS devices. For a simultaneous switching of all inputs switching threshold needs to be Vth = 2.4 V. For such a result. What should be the width of the PMOS transistors? c)For the same circuit what is the ratio of fastest to slowest output change tpHL(Max) / tpHL(min).
Solution
1 0

In the dynamic logic circuit shown below, all the transistors have the minimum channel length, and their sizes (widths) are marked. The inverter at the output is a standard static CMOS inverter with a PMOS size of 2 and an NMOS size of 1 . For a unit-sized NMOS or PMOS transistor, the intrinsic capacitance at its drain or source terminal is CD, and the capacitance at its gate is CG. For unit-sized NMOS and PMOS transistors, their onresistances are RN and RP, respectively. CD = CG = 1 fF and RP = 2 RN = 2 kΩ. (a) Express y as a Boolean function of the inputs A, B, C and D in the evaluation phase (CLK = 1). (b) Find the capacitances at nodes y, a, b and c, respectively. (c) Let A = B = D = 1 and C = 0 and suppose nodes a, b and c are at 0 V in the pre-charge phase (CLK = 0). Estimate the time it takes for the voltage at y to decrease from VDD to VDD/2 in the evaluation phase. (d) Repeat (c) if nodes a, b and c are at VDD in the pre-charge phase. (e) If the inputs are C = 1 and A = B = D = 0 and suppose nodes a, b and c are at 0 V in the pre-charge phase. Considering the charge sharing effect, what is the voltage at node y in the evaluation phase? It is known VDD = 2.5 V, VTN = 0.5 V and the body effect of the transistors can be ignored.

Solution
0 0