Question

Notify Me Bookmark

Design the circuit diagram for a single static CMOS logic gate which implements the logic function: O/P = A ⋅ B + C + D where A, B, C and D are the logic gate inputs and O/P is the logic gate output.

Design the circuit diagram for a single static CMOS logic gate which implements the logic function: O/P = A ⋅ B + C + D where A, B, C and D are the logic gate inputs and O/P is the logic gate output.

Image text
Design the circuit diagram for a single static CMOS logic gate which implements the logic function: O/P = A ⋅ B + C + D where A, B, C and D are the logic gate inputs and O/P is the logic gate output.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Design a complex CMOS gate implementation of the following function: Y = A⋅(B + C)⋅D¯ a) Draw a logic circuit schematic for Y in which the Pull-Up Network (PUN) is the dual of the Pull-Down Network (PDN). Make sure to draw any necessary inverters for inputs. b) Assume that a basic matched inverter has a channel length of L = 0.25 μm, an NMOS channel width of WN = 0.5 μm and a PMOS channel width of WP = 1.0 μm, and that this sizing guarantees at least equal output current driving capability (i.e., equal high-to-low and low-to-high propagation delays). Determine the proper W/L ratios for each transistor in the complex logic gate to ensure a current driving capability at least equal to that of the basic matched inverter. Keep the W/L ratios as small as possible to minimize the gate's area. Calculate the total area of the complex CMOS circuit, including the area of the inverters for inputs.
Solution
0 0

(CMOS Logic Gate Design - 10 points) Recall that CMOS logic gates consist of a pull-down and a pull-up network comprising of NMOS and PMOS transistors, respectively. Moreover, CMOS gates implement inverting logic. Keeping this in mind, design a CMOS gate that implements the following Boolean expressions. Note that you are asked to design just one logic gate implementing the entire Boolean function. Use as few transistors as possible. Make sure to label the input (gate of each transistor) variables accordingly. Furthermore, don’t forget to show where the output of the logic gate is. a) X • Y + Z b) A • B + C • D c) A¯ + B¯ + C¯ d) (A¯ + B¯) • (C¯ + D¯)
Solution
0 0

In the dynamic logic circuit shown below, all the transistors have the minimum channel length, and their sizes (widths) are marked. The inverter at the output is a standard static CMOS inverter with a PMOS size of 2 and an NMOS size of 1 . For a unit-sized NMOS or PMOS transistor, the intrinsic capacitance at its drain or source terminal is CD, and the capacitance at its gate is CG. For unit-sized NMOS and PMOS transistors, their onresistances are RN and RP, respectively. CD = CG = 1 fF and RP = 2 RN = 2 kΩ. (a) Express y as a Boolean function of the inputs A, B, C and D in the evaluation phase (CLK = 1). (b) Find the capacitances at nodes y, a, b and c, respectively. (c) Let A = B = D = 1 and C = 0 and suppose nodes a, b and c are at 0 V in the pre-charge phase (CLK = 0). Estimate the time it takes for the voltage at y to decrease from VDD to VDD/2 in the evaluation phase. (d) Repeat (c) if nodes a, b and c are at VDD in the pre-charge phase. (e) If the inputs are C = 1 and A = B = D = 0 and suppose nodes a, b and c are at 0 V in the pre-charge phase. Considering the charge sharing effect, what is the voltage at node y in the evaluation phase? It is known VDD = 2.5 V, VTN = 0.5 V and the body effect of the transistors can be ignored.

Solution
0 0