Question

Notify Me Bookmark

Design the circuit of Fig. P5.44 to establish a drain current of 0.1 mA and a drain voltage of +0.3 V. The MOSFET has Vt = 0.5 V, μnCox = 400 μA/V2, L = 0.4 μm, and W = 5 μm. Specify the required values for RS and RD

Design the circuit of Fig. P5.44 to establish a drain current of 0.1 mA and a drain voltage of +0.3 V. The MOSFET has Vt = 0.5 V, μnCox = 400 μA/V2, L = 0.4 μm, and W = 5 μm. Specify the required values for RS and RD

Image text
Design the circuit of Fig. P5.44 to establish a drain current of 0.1 mA and a drain voltage of +0.3 V. The MOSFET has Vt = 0.5 V, unCox = 400 uA/V2, L = 0.4 um, and W = 5 um. Specify the required values for RS and RD

Detailed Answer

3 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (3)
  • Correct answers (3)
  • Complete solution (3)
  • Step-by-step solution (3)
  • Fully explained (3)

Similar/Related Questions

Consider the circuit shown below. a) what are the required values for RS and RD to establish a drain current of 0.1 mA and a drain voltage of +0.4 V. The MOSFET has Vt = 0.5 V, μnCox = 300 μA/V2, L = 0.4 μm, and W = 5 μm. (8 marks for each parameter) b) If Vt = 0.3 V and kn = 5 mA/V2. The voltages at the source and the drain are measured and found to be −0.6 V and +0.2 V, respectively. What current ID is flowing ( 8 marks), and what must the values of RD and RS be? ( 8 marks for each parameter) What is the largest value for RD for which ID remains unchanged from the value found? ( 10 marks)

Solution
0 0

The PMOS transistor in the circuit of Fig. P5.49 has V1 = -0.5 V, μpCox = 100 μA/V^2, L = 0.18 μm, and λ = 0. Find the values required for W and R in order to establish a drain current of 180 μA and a voltage VD of 1 V.
Solution
2 0

D 8.7 The current-steering circuit of Fig. P8.7 is fabricated in a CMOS technology for which μnCox = 400 μA/V2, μpCox = 100 μA/V2, Vtn = 0.5 V, Vtp = −0.5 V, VAn′ = 6 V/μm, and |VAp′| = 6 V/μm. If all devices have L = 0.5 μm, design the circuit so that IREF = 20 μA, I2 = 80 μA, I3 = I4 = 50 μA, and I5 = 100 μA. Use the minimum possible device widths needed to operate the current source Q2 with voltages at its drain as high as + 0.8 V and to operate the current sink Q5 with voltages at its drain as low as −0.8 V. Specify the widths of all devices and the value of R. Find the output resistance of the current source Q2 and the output resistance of the current sink Q5.

Solution
2 0