Question

Notify Me Bookmark

Determine small signal voltage gain if VCEQ = 5.0 V. Transistor parameters (NMOS): kn = 100 μA/V2, VTN = 1 V, and λ = 0.01 V-1. Transistor parameters (BJT): β = 100, VBE (on) = 0.7 V, and VA = ∞.

Determine small signal voltage gain if VCEQ = 5.0 V. Transistor parameters (NMOS): kn = 100 μA/V2, VTN = 1 V, and λ = 0.01 V-1. Transistor parameters (BJT): β = 100, VBE (on) = 0.7 V, and VA = ∞.

Image text
Determine small signal voltage gain if VCEQ = 5.0 V. Transistor parameters (NMOS): kn = 100 μA/V2, VTN = 1 V, and λ = 0.01 V-1. Transistor parameters (BJT): β = 100, VBE (on) = 0.7 V, and VA = ∞.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Determine small signal voltage gain if VCEQ = 5.0 V. Transistor parameters (NMOS): kn = 100 uA/V^2, VTN = 1 V, and lambda = 0.01 V^-1. Transistor parameters (BJT): beta = 100, VBE(on) = 0.7 V, and VA = infinity.
Solution
2 0

To improve the performance of the differential amplifier shown in Figure Q1, the biasing current source is replaced by a Widlar current source. The collector resistors are replaced by a current mirror formed by the matched bipolar transistors Qs and Q6, and the bipolar transistors Q1 and Q2 are replaced by the matched field-effect transistors M1 and M2. A single-sided output at the drain terminal of M2 is used. The transistor parameters for the bipolar transistors are: β = 100, VBE (on) = VEB(on) = 0.7 V, and VA = 100 V. The transistor parameters for M1 and M2 are: Kn = 0.15 mA/V2, VT N = 0.8 V, λ = 0.01 V-1 . The improved differential amplifier is shown in Figure Q2. (a) Determine the quiescent voltages and currents of M1 and M2 when v1 = v2 = 0. (4 marks) (b) Design the value of resistor RE such that IQ = 0.1 mA. (2 marks) (c) Determine the maximum and minimum common-mode voltages that can be applied to v1 and v2. (3 marks) (d) Determine the percentage change in IQ when the common-mode voltage applied to v1 and v2 changes from the maximum to the minimum value obtained in part (c). (5 marks) (c) Define vd = v1 - v2, determine the differential-mode voltage gain Ad of the improved differential amplifier.
Solution
0 0

Figure Q2 shows a BJT differential amplifier stage that uses a tail resistor, RO, to provide a bias current, IQ. Transistor parameters are VBE(on) = 0.7 V, β = 100, and VA = ∞. Also, Vcc = 15 V, −VEE = −15 V, RO = 56 kΩ, and RC = 15 kΩ. Figure Q2: Differential Amplifier (a) To calculate the transistor Q-points, what are the values you would assume for vB1 and vB2 ? (b) Determine the bias currents, IC1 and IC2, of the amplifier. (c) For a single-sided output, determine the differential-mode voltage gain (Ad), the commonmode voltage gain (Acm), the differential input impedance (Rid), the common-mode input impedance (Ricm), and the common-mode rejection ratio (CMRR) in dB for the differential amplifier. Assume a signal source resistance of 50 Ω on each input. (d) Will changing RC affect the amplifier CMRR? (e) Suggest two changes to this amplifier each of which would allow the CMRR to be increased. For each, give a reason why the change would have the desired effect.

Solution
0 0