Question

Notify Me Bookmark

Determine the value of the source voltage VS in the circuit shown in the figure. Assume VDD = 5 V, VSS = −5 V, RS = 100 kΩ. The NMOS transistor has Vt = 0.8 V, kn = 0.5 mA/V2. Neglect the channel-length modulation (that is, λ = 0).

Determine the value of the source voltage VS in the circuit shown in the figure. Assume VDD = 5 V, VSS = −5 V, RS = 100 kΩ. The NMOS transistor has Vt = 0.8 V, kn = 0.5 mA/V2. Neglect the channel-length modulation (that is, λ = 0).

Image text
Determine the value of the source voltage V S in the circuit shown in the figure. Assume V D D = 5 V , V S S = − 5 V , R S = 100 k Ω .
The NMOS transistor has V t = 0.8 V , k n = 0.5 m A / V 2 . Neglect the channel-length modulation (that is, λ = 0 ).

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

An NMOS transistor in the amplifier circuit of Fig. 2 has Vt = 1 V, kn = 4 mA/V2. Assume VDD = 10 V, RG1 = 6MΩ, RG2 = 4MΩ, RS = 1kΩ, and RD = 2kΩ. (a) (10 points) Neglect the channel-length modulation and body effect. Find the voltage VGS and the drain current ID. Then, find gm. (b) (10 points) Find ro if VA = 100 V. Then, find the resistance Rod looking into the drain terminal of NMOS and the voltage gain vo/vsig.
Solution
0 0

In this amplifier circuit, the high and low DC voltage sources are: VDD = 5 V and VSS = −5 V respectively. Consider that all three external capacitors have high values. The PMOS transistor has a threshold voltage equal to Vt = −1 V and kp = kp′(W/L) = 0.4 mA/V2, and the NMOS transistor has a threshold voltage Vt = 1 V and a kn = kn′(W/L) = 2 mA/V2. It was shown in HW#7 that the DC drain voltage of the PMOS transistor is −0.2 V and the DC source of the NMOS transistor is −2 V. a) Perform the small signal analysis of this circuit and determine the voltage gain: AV = Vo/Vi b) Determine the input and output resistance of this amplifier Rin and Rout . c) Discuss what is the purpose of the part of the circuit between CC2 and CC3 which includes the NMOS transistor in this amplifier design. d) Determine the parameters of a simple voltage amplifier model (discussed in chapter 1) which will represent this amplifier. Note that the parameters of the simple voltage amplifier excludes any series resistance of the external source ( Vi ) (in this case it is zero anyway) and the load resistance (in this case RL = 2 kΩ ). e) Using the simple model from part (c) determine the voltage gain AV = Vo/Vi and see if it agrees with the answer of part (a). VDD
Solution
0 0

Ex 4.2: For the circuit shown in Figure 4.1, VDD = 3.3 V and RD = 10 kΩ. The transistor parameters are VTN = 0.4 V, kn′ = 100 μA/V2, W/L = 50, and λ = 0.025 V−1. Assume the transistor is biased such that IDQ = 0.25 mA. (a) Verify that the transistor is biased in the saturation region. (b) Determine the small-signal parameters gm and ro. (c) Determine the small-signal voltage gain. (Ans. (a) VGSQ = 0.716 V and VDSQ = 0.8 V so that VDS > VDS (sat); (b) gm = 1.58 mA/V, ro = 160 kΩ; (c) -14.9) Figure 4.1 NMOS common-source circuit with time-varying signal source in series with gate dc source

Ex 4.2: For the circuit shown in Figure 4.1, VDD = 3.3 V and RD = 10 kΩ. The transistor parameters are VTN = 0.4 V, kn′ = 100 μA/V2, W/L = 50, and λ = 0.025 V−1. Assume the transistor is biased such that IDQ = 0.25 mA. (a) Verify that the transistor is biased in the saturation region. (b) Determine the small-signal parameters gm and ro. (c) Determine the small-signal voltage gain. (Ans. (a) VGSQ = 0.716 V and VDSQ = 0.8 V so that VDS > VDS (sat); (b) gm = 1.58 mA/V, ro = 160 kΩ; (c) -14.9) Figure 4.1 NMOS common-source circuit with time-varying signal source in series with gate dc source
Solution
0 0