Question

Notify Me Bookmark

Experimental Work: Specify the drain and source pins for each transistor in the XOR logic gate given in figure 1. Describe the method of operation of the circuit. Write the network list of XOR pass transistor design given in figure 1 using table 1 and table 2 parameters. Figure 1. Pass Transistor XOR Gate

Experimental Work: Specify the drain and source pins for each transistor in the XOR logic gate given in figure 1. Describe the method of operation of the circuit. Write the network list of XOR pass transistor design given in figure 1 using table 1 and table 2 parameters. Figure 1. Pass Transistor XOR Gate

Image text
Experimental Work:
  1. Specify the drain and source pins for each transistor in the XOR logic gate given in figure 1.
  2. Describe the method of operation of the circuit.
  3. Write the network list of XOR pass transistor design given in figure 1 using table 1 and table 2 parameters. Figure 1. Pass Transistor XOR Gate

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Pass Transistor Logic VDD = 2.5 V(W/L)2 = 1.5 um/0.25 um (W/L)1 = 0.5 um/0.25 um (W/L)ni = 0.5 um/0.25 um kn′ = 115 uA/V2, kp′ = −30 uA/V2 VtN = 0.43 V, VtP = −0.4 V Figure 6.12 Level restoring circuit. Consider the circuit of Figure 6.12 . Assume the inverter switches ideally at VDD/2, neglect body effect, channel length modulation and all parasitic capacitance throughout this problem. a. What is the logic function performed by this circuit? b. Explain why this circuit has non-zero static dissipation. c. Using only just 1 transistor, design a fix so that there will not be any static power dissipation. Explain how you chose the size of the transistor. d. Implement the same circuit using transmission gates. e. Replace the pass-transistor network in Figure 6.12 with a pass transistor network that computes the following function: x = ABC at the node x. Assume you have the true and complementary versions of the three inputs A, B and C.

Solution
0 0

The figure below shows a transistor logic circuit constructed with two NMOS transistors and a 10 kΩ pull-up resistor. For this problem, assume that the effective resistance between drain and source is approximately 0 Ω for the ON state and an open circuit for the OFF state. 1.1 Copy this truth table to your answer sheet and fill it in. Calculate the value for Vout and indicate the state of each of the transistors (ON or OFF) for each of the following input combinations. All voltages are referenced to GND. 1.2 What logic gate does this circuit implement? 1.3 What is the power this logic circuit consumes when Vout = 0 V?

Solution
0 0

The circuit shown in Figure 4 is a logic function ‘F’ implemented using NMOS transistors with the following parameters: (Given: Vt = 1V and K = 0.5 mA/V2 , RL = 20 kΩ, VDD = 10 V ); If the logic levels for the inputs ‘C & D’ are given as 10 V and 0 V for logic ‘1’ and ‘0’ respectively 1. Derive the truth table for function ‘F’ indicating the transistors’ mode of operation. (Fill in the table below) 2. Verify the mode of operation for the transistors at every row in the truth table 3. State the equivalent logic gate of ‘F’ Figure 4 Logic Function ‘F’ using NMOS Transistor Input ‘C’ logic Value Input ‘D’ logic Value M1 mode M2 mode ‘F’ Logic Value (‘1’ or ‘0’) ‘F’ Voltage Value [V]

Solution
0 0