Question

Notify Me Bookmark

Find the value of k in the network in the figure such that the power supplied by the 6-A source is 120 W.

Find the value of k in the network in the figure such that the power supplied by the 6-A source is 120 W.

Image text
Find the value of k in the network in the figure such that the power supplied by the 6-A source is 120 W.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

The circuit shown in figure (2) utilizes an ideal transformer and it operates in the steady-state condition at 100 Hz. The circuit operates such that the impedance Zs dissipates the maximum possible power. Answer the following: a) Define the characteristics of the ideal transformer b) Calculate the currents I1 and I2 and voltage Vo all in phasor and sinusoidal forms. c) Calculate the complex power supplied by the voltage source and its operating power factor. Then drew the complex power triangle.
Solution
0 0

a) Find values for the current ratios Ib1/Ib2 and Ib2/Io? : (Note: 2xMb3 indicates that 2 identical devices are connected in parallel). Hint: All equal type MOS devices are perfectly matched. b) Determine the bias resistor Rb such that Ib1 = 100 µA. Hint: Write down KVL for the loop marked by the curved arrow. c) What is the minimum value of V0 that still keeps the current source working as intended? A symbolic expression suffices. P-MOS N-MOS kp = 200 µA/V2 kn = 200 µA/V2 Vtp = -0.8 V Vtn = +0.8 V λp = 0.02 V-1 λn = 0.02 V-1 k = µCoxW/L All n-channel and all p-channel devices are perfectly matched.
Solution
0 0

The MOSFET in the common source amplifier is shown below. All the MOSFETs are identical. Assume negligible channel length modulation. VTn = +1 V, μ = 600 cm2/V⋅s, Cox’ = 0.23 μF/cm2, Cgs = 1 pF, and Cgd = 0.2 pF. (50pts) RS = 1 MΩ RG = 1 MΩ RD = 10 kΩ RL = 10 kΩ (i) Calculate the MOSFET W/L such that the bias current of M1 and transconductance of M1 are 1 mA and 5 mS, respectively. (ii) Find the mid frequency voltage gain in dB. (iii) Find the upper 3-dB frequency, fH. (iv) Find the value of CG, CS, and CD such that the corresponding poles are at 1 Hz, 100 Hz, and 10 Hz, respectively. (v) Write down all the zeros and poles of the overall amplifier (3 zeros and 3 poles for the lower frequency response and 1 pole for the higher frequency response). Sketch and carefully label the Bode plot for the gain magnitude (indicate the corner frequency and the slope). Specify the lower 3-dB frequency fL.
Solution
0 0