Question

Notify Me Bookmark

Find the value of L in the network in the figure below so that the total inductance LT will be 2.25 mH.

Find the value of L in the network in the figure below so that the total inductance LT will be 2.25 mH.

Image text
Find the value of L in the network in the figure below so that the total inductance LT will be 2.25 mH.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Multistage Amplifier In this last question, you are going to design a 2-stage amplifier. The first stage is a common-source amplifier and the second is a source follower, as shown in the figure below: Some parameters you may use are: VDD = 5 V, μnCox = 0.2 mA/V2, μpCox = 0.1 mA/V2, λn = 0.06, λp = 0.03, γ = 0, VTHN = 0.7 V, VTHP = −0.6 V; allow RL = 2 KΩ. Note: CS is large enough so that it will act as a short circuit for frequencies of interest. The circuit should satisfy the following specs: Total power consumption = 6.5 mW (use this spec to find total current drawn from VDD) The ratio of power consumed by the biasing branch: the amplifier: the follower stage should be 1:2:10 CS stage should provide a gain equal to −40 V/V Source follower stage should have a gain of 0.6 V/V Vomax = 3.8 V Find the W/L of all transistors and value of RD. Make reasonable simplifications.
Solution
0 0

Q6. The network in figure below operates at a resonant frequency of ω = 2000 rad/s. Select the values for the unknown circuit elements so that the circuit has a Q = 50. Then find the value of the voltage across the capacitor. L = mH R = Ohm VC = ∠ V (phasor)
Solution
0 0

In this question, you are asked to find the effective transconductance (Gm) and the resistance into the drain (Rx) of a common-source amplifier with source degeneration. Based on the results, the voltage gain of a common-source amplifier with source degeneration will be evaluated a) The figures shown below are a circuit to find the effective transconductance (G) of the NMOSEFT with source degeneration (left) and its corresponding small-signal circuit (right). It is noted that the output is shorted to VDD (ac grounded) since the definition of effective transconductance is the ratio between the short-circuit output current and the input signal voltage. Prove that Gm is given by Gm = id/vin = gm/1+gmRs In this calculation, the current passing through ro can be neglected since, in general, ro is very large when the NMOSFET operates in saturation region and so this current is very small. Thus, the indication of id is the current of the voltage-controlled current source (gmvgs) only. b) The figure shown below is the method to evaluate the resistance looking into the drain (i.e. Rx) of a source-degenerated NMOSFET. The circuit is shown on the left while the equivalent small-signal modeling is shown on the right. It is noted that the bias condition (VBiAS) is set so that the values of gm and ro, can be defined. Moreover, there is no input signal (i.e. Vin = 0) since we would like to see the value of Rx which is due to the circuit only but not due to the external effect. Based on the above small-signal model, prove that RX = ro(1 + gmRS) The complete common-source amplifier with source degeneration is shown below. c) The complete common-source amplifier with source degeneration is shown below. Prove that the voltage gain of this amplifier is given by v. Vin Explain the reason(s) why the voltage gain is negative. What is the physical meaning of negative voltage gain?

In this question, you are asked to find the effective transconductance (Gm) and the resistance into the drain (Rx) of a common-source amplifier with source degeneration. Based on the results, the voltage gain of a common-source amplifier with source degeneration will be evaluated a) The figures shown below are a circuit to find the effective transconductance (G) of the NMOSEFT with source degeneration (left) and its corresponding small-signal circuit (right). It is noted that the output is shorted to VDD (ac grounded) since the definition of effective transconductance is the ratio between the short-circuit output current and the input signal voltage. Prove that Gm is given by Gm = id/vin = gm/1+gmRs In this calculation, the current passing through ro can be neglected since, in general, ro is very large when the NMOSFET operates in saturation region and so this current is very small. Thus, the indication of id is the current of the voltage-controlled current source (gmvgs) only. b) The figure shown below is the method to evaluate the resistance looking into the drain (i.e. Rx) of a source-degenerated NMOSFET. The circuit is shown on the left while the equivalent small-signal modeling is shown on the right. It is noted that the bias condition (VBiAS) is set so that the values of gm and ro, can be defined. Moreover, there is no input signal (i.e. Vin = 0) since we would like to see the value of Rx which is due to the circuit only but not due to the external effect. Based on the above small-signal model, prove that RX = ro(1 + gmRS) The complete common-source amplifier with source degeneration is shown below. c) The complete common-source amplifier with source degeneration is shown below. Prove that the voltage gain of this amplifier is given by v. Vin Explain the reason(s) why the voltage gain is negative. What is the physical meaning of negative voltage gain?

Solution
1 0