Question

Notify Me Bookmark

For the BICMOS amplifier shown below; the BJT parameters are β = 100, |VBE| = 0.7. The NMOS transistor's parameters are |Vt| = 1 V, k = 2 mAV2, a) Find the DC collector current for Q1 (neglect the base current, i.e. IE ≈ IC) and the DC drain current for M1 b) Find the voltage gain, input resistance, and output resistance

For the BICMOS amplifier shown below; the BJT parameters are β = 100, |VBE| = 0.7. The NMOS transistor's parameters are |Vt| = 1 V, k = 2 mAV2, a) Find the DC collector current for Q1 (neglect the base current, i.e. IE ≈ IC) and the DC drain current for M1 b) Find the voltage gain, input resistance, and output resistance

Image text
For the BICMOS amplifier shown below; the BJT parameters are β = 100 , | V B E | = 0.7 . The NMOS transistor's parameters are | V t | = 1 V , k = 2 m A V 2 , a) Find the D C collector current for Q 1 (neglect the base current, i.e. I E ≈ I C ) and the DC drain current for M1 b) Find the voltage gain, input resistance, and output resistance

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Electronics 2 - Homework 2 Second semester 2023-2024 Solve the following questions, and verify your solution using LTSpice. simulation. For each question you need to:Solve the question by handProvide a screenshot of the circuitProvide a screenshot confirming the hand calculations Note that you can change the BJT parameter Beta by adding a SPICE directive and changing the parameter BF Question 1: BJT transistors The parameters for each transistor in the figure below are β = 80, and VBE(m) = 0.7 V. Determine all the voltages and currents in the circuit. Circuit for question 1 Question 2: Amplifier Configurations The signal source in the circuit below is vs = 5 sin⁡(100000πt)mV. The transistor parameters are β = 120, and the capacitors are 10 μF (a) Design the circuit such that IC = 0.25 mA and VCE = 3 V. (b) Find the open circuit voltage gain Avo (c) Find the input resistance Rin (from the base of the transistor) (d) Find the output resistance (e) Use the amplifier model (Avo, Rin, Ro) to find vo(t). Circuit for question 2 Question 3: Amplifier Configurations Consider the circuit shown. The transistor current gain β = 180. and the source signal has a frequency of 100 kHz and the capacitors are 10 μF Note that the current source is replaced by an open circuit in the small signal model equivalent circuit. Determine: (a) the voltage gain from source to load, (b) the input resistance seen by the source (c) the output resistance

Solution
0 0

Emitter follower: The figure below shows a common base amplifier using an NPN BJT which has a common emitter current gain of β = 200, and a base-emitter voltage of VBE = 0.7 V. Ignore the Early effect, i.e. take VA = ∞. The resistor values are RE = 4.7 kΩ, RB1 = 43 kΩ and RB2 = 56 kΩ. The supply voltages are ±5 V. The collector current is IC ≅ 1 mA. a) Draw the small-signal equivalent circuit b) Calculate the transistor's small signal transconductance gm, and the small signal input resistance rπ. c) Calculate the unloaded voltage gain, Avo, input resistance Rin and output resistance Rout of the amplifier. d) What are the loaded voltage gain, Av and overall gain Gv if Rsig = 1kΩ and RL = 1kΩ?
Solution
3 0

Circuit diagrams of six different single-stage common-source amplifiers. In the circuits Vdd = 5 V, (W/L)1 = 100, (W/L)2 = 25, Vb = 2 V, RD = 500 Ω, RS = 100 Ω, Vin = 3 + 0.01sin⁡(2000πt + 90∘)V. (a) Find out the bias points (DC node voltages and branch currents) of the circuits. If any of the transistors are not in the expected region of operation, modify the circuits by changing the aspect ratios of the transistors for the proper functionality. (b) Calculate the small signal gain, input resistance, and output resistance of the circuits. (c) Plot Vin and Vout for 3 ms and neatly label it. (d) Calculate Vout , max and Vout , min , and hence the maximum output voltage swing of the amplifiers. Using this find out what is maximum allowable input voltage swing. By changing the aspect ratios of the transistors, can you obtain the maximum possible voltage swing? (e) Can you increase the gain of the amplifiers by a factor of 2 just by changing the aspect ratios of the transistors? (f) Repeat (a)-(e) assuming the second order effects are present in the transistors.

Solution
0 0