Question

Notify Me Bookmark

For the BJT cascaded voltage amplifier shown in Fig. 3, Assume that the two transistors are identical with the following parameters: VBE = 0.7 V, β = 100, VA = ∞, Calculate: The DC collector currents for Q1 and Q2 The mid-band voltage gain (Vout /Vin) The second stage input resistance Rin2

For the BJT cascaded voltage amplifier shown in Fig. 3, Assume that the two transistors are identical with the following parameters: VBE = 0.7 V, β = 100, VA = ∞, Calculate: The DC collector currents for Q1 and Q2 The mid-band voltage gain (Vout /Vin) The second stage input resistance Rin2

Image text
For the BJT cascaded voltage amplifier shown in Fig. 3, Assume that the two transistors are identical with the following parameters: VBE = 0.7 V, β = 100, VA = ∞, Calculate: The DC collector currents for Q1 and Q2 The mid-band voltage gain (Vout /Vin) The second stage input resistance Rin2

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Figure Q2 shows a BJT differential amplifier stage that uses a tail resistor, RO, to provide a bias current, IQ. Transistor parameters are VBE(on) = 0.7 V, β = 100, and VA = ∞. Also, Vcc = 15 V, −VEE = −15 V, RO = 56 kΩ, and RC = 15 kΩ. Figure Q2: Differential Amplifier (a) To calculate the transistor Q-points, what are the values you would assume for vB1 and vB2 ? (b) Determine the bias currents, IC1 and IC2, of the amplifier. (c) For a single-sided output, determine the differential-mode voltage gain (Ad), the commonmode voltage gain (Acm), the differential input impedance (Rid), the common-mode input impedance (Ricm), and the common-mode rejection ratio (CMRR) in dB for the differential amplifier. Assume a signal source resistance of 50 Ω on each input. (d) Will changing RC affect the amplifier CMRR? (e) Suggest two changes to this amplifier each of which would allow the CMRR to be increased. For each, give a reason why the change would have the desired effect.

Solution
0 0

For the circuit as shown below, all the BJTs Q1, Q2, Q3 and Q4 are identical, VBE = 0.7 V, β = 80, VA = 100 V, neglect rx and ro1,2 a) What are the DC collector current IC and DC collector voltage VC of Q1 and Q2 ? You may consider IC3, 4 = IE3, 4 in this step ( 6 marks) b) What is the input common-mode range for this differential amplifier? (10 marks) c) Determine the differential voltage gain Ad(8 marks) d) Determine the differential input impedance Rid and output impedance Rod, include RC ( 14 marks) e) If the β of Q2 is equal to 90 due to fabrication tolerance and the other components are perfect, what are the resulting common mode gain Acm and CMRR? (12 marks)

Solution
0 0

To improve the performance of the differential amplifier shown in Figure Q1, the biasing current source is replaced by a Widlar current source. The collector resistors are replaced by a current mirror formed by the matched bipolar transistors Qs and Q6, and the bipolar transistors Q1 and Q2 are replaced by the matched field-effect transistors M1 and M2. A single-sided output at the drain terminal of M2 is used. The transistor parameters for the bipolar transistors are: β = 100, VBE (on) = VEB(on) = 0.7 V, and VA = 100 V. The transistor parameters for M1 and M2 are: Kn = 0.15 mA/V2, VT N = 0.8 V, λ = 0.01 V-1 . The improved differential amplifier is shown in Figure Q2. (a) Determine the quiescent voltages and currents of M1 and M2 when v1 = v2 = 0. (4 marks) (b) Design the value of resistor RE such that IQ = 0.1 mA. (2 marks) (c) Determine the maximum and minimum common-mode voltages that can be applied to v1 and v2. (3 marks) (d) Determine the percentage change in IQ when the common-mode voltage applied to v1 and v2 changes from the maximum to the minimum value obtained in part (c). (5 marks) (c) Define vd = v1 - v2, determine the differential-mode voltage gain Ad of the improved differential amplifier.
Solution
0 0