Question

Notify Me Bookmark

For the circuit given in Figure 2, calculate the differential and common mode gains Ad = Vod/Vid and Acm = Vod/Vcm if the output ( vod ) is taken differentially. Also calculate the CMRR. Output resistance RSS of the current source is 200kΩ. Ignore the output resistances of the transistors (r0) and assume the gm to be 2 mA/V⋅(vp = vcm + vid /2,vn = vcm − vid /2)

For the circuit given in Figure 2, calculate the differential and common mode gains Ad = Vod/Vid  and Acm = Vod/Vcm if the output ( vod ) is taken differentially. Also calculate the CMRR. Output resistance RSS of the current source is 200kΩ. Ignore the output resistances of the transistors (r0) and assume the gm to be 2 mA/V⋅(vp = vcm + vid /2,vn = vcm − vid /2)

For the circuit given in Figure 2, calculate the differential and common mode gains Ad = Vod/Vid and Acm = Vod/Vcm if the output ( vod ) is taken differentially. Also calculate the CMRR. Output resistance RSS of the current source is 200kΩ. Ignore the output resistances of the transistors (r0) and assume the gm to be 2 mA/V⋅(vp = vcm + vid /2,vn = vcm − vid /2)

Image text
For the circuit given in Figure 2, calculate the differential and common mode gains Ad = Vod/Vid and Acm = Vod/Vcm if the output ( vod ) is taken differentially. Also calculate the CMRR. Output resistance RSS of the current source is 200kΩ. Ignore the output resistances of the transistors (r0) and assume the gm to be 2 mA/V⋅(vp = vcm + vid /2,vn = vcm − vid /2)

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

(a) Figure Q2(a) shows a differential amplifier with a current source at the bottom. It is given that VDD = VSS = 15 V, ISS = 300 μA, Early effect can be ignored (λ = 0), Kn = 400 μA/V2 and VTN = 1 V. You may assume MOSFET in saturation region. (i) For single ended outputs, draw the half-circuits and derive the algebraic equations for the differential mode and common-mode gains as well as CMRR. [6 Marks] (ii) For the above case of single ended output, what should be the value of Rss to get CMRR = 100? [4 Marks] Figure Q2(a) (b) Figure Q2(b) shows a MOSFET based current mirror. Draw the AC small signal model and derive an equation for output resistance Rout as shown in the figure. You can keep your answer in terms of gm, ro etc but denote the subscript 1,2,3 etc to indicate which transistor. In other words, denote transconductance of M2 by writing gm2 and so on. [6 marks] (c) Draw the diagram of a BJT based Class B push-pull power amplifier and derive the maximum possible power efficiency of this circuit. You may ignore crossover distortion and assume |VCE(sat)| = 0 V. [9 marks]
Solution
0 0

Question 1 (Differential amplifiers) (20) The transistors of the differential pair of Figure 1 are supposed to be matched. Assume that for both transistors VBE = 0.7 V and β = 100. The two transistors are biased for Vin1 = Vin2 = 0 V. Find gm1, gm2, rπ1 and rπ2. (4) For vin1 = vid/2 and vin2 = −vid/2, where vid is a small signal differential input, find the magnitude of the differential gain ∣(vo1− Vo2)/vid if the output is taken differentially. (4) Find the differential mode input impedance Rid. (4) For vin1 = vin2 = vicm, find the common mode input resistance Ricm. (4) Find the magnitude of the single ended common mode gain |vol/vicm | and calculate the single-ended Common Mode Rejection Ratio CMRR if the resistance connected to the collector of Q2 has an error of ±1%. (4) Figure 1

Solution
0 0

A differential amplifier circuit is shown in the figure below. In the circuit, VDD = +10 V, the current I provided by the current source is 2 mA and the internal source resistance is RSS = 50 kΩ. The transistor parameters are as follows: - All NMOS: μnCox = 100 μA/ V2, W/L = 10 μm/1.6 μm, Vtn = 0.7V, λnL = 0.10 μm/V - All PMOS: μpCox = 50 μA/V2, W/L = 10μm/1.6μm, Vtp = −0.8 V, λpL = 0.05 μm/V (1) Calculate the DC output voltage VO (ignore the channel length modulation effect of all transistors). (2) Under the differential mode operation (i.e., v1 = 1/2vd, v2 = -1/2vd ), calculate the differential mode small signal voltage gain Ad = vo/vd (include the channel length modulation effect of all transistors). Hint: please pay special attention to the connections of Q3 and Q4 transistors.
Solution
2 0