Question

Notify Me Bookmark

For the circuit shown below, If μnCox = 200 μA/V2, VTh = 0.4 V, λ = 0.1 V−1 and W L = 20/0.18 , the small-signal transconductance is

For the circuit shown below, If μnCox = 200 μA/V2, VTh = 0.4 V, λ = 0.1 V−1 and W L = 20/0.18 , the small-signal transconductance is

Image text
For the circuit shown below, If μnCox = 200 μA/V2, VTh = 0.4 V, λ = 0.1 V−1 and W L = 20/0.18 , the small-signal transconductance is

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

Calculate the drain current of M1 (a) without considering channel-length modulation, (b) including channel-length modulation. Assume μnCox = 200 μA/V2, W/L = 10 /0.18, and VTH = 0.4 V, λ = 0.1 V−1.
Solution
0 0

For the CMOS OP amp shown below, use parameters of vthn = 0.4, vthp = −0.4, μnCox = 100 μA/V2, μpCox = 40 μA/V2, λ = 0.01 V−1 and W/Leff = 200 for hand calculations. The input common mode voltage is 1.25 V and the output common mode voltage is 1.25 V. The W/L ratio of unspecified transistors is 100/1. Set the resistor value so that the bias current M1 is 100 uA. Set the device size of M5 so that there is no systematic offset. The offset is defined as an input voltage to make the output 1.25 V Estimate the small signal voltage gain Estimate the range of input common mode voltage for proper operation Estimate the maximum output swing
Solution
0 0

Q 1: Assume μnCox = 200 μA/V2, (WL)M1, M2 = (10 μm/1 μm), Vthn = 0.4 V, λ = 0 For the figures given below (upper part of circuit is not shown), Vin1 = VCM + (vid/2) and Vin2 = VCM − (vid/2). If −0.36 V ≤ vid ≤ 0.36 V, what is the bias current provided by M3 ? If Vb = 0.64 V, what is the size of M3 ? If vid, max is applied at gate of M1 with gate of M2 grounded, what is the voltage Vp ?

Solution
0 0