Question

Notify Me Bookmark

For the CMOS inverter stage in Figure 3, Kn = 3 mA/V2, Kp = 1 mA/V2, (W/L)Qp = 1/10, (W/L)QN = 1/30. The threshold voltages are VTHN = I-VTHPl = 1V. The Early voltages can be assumed to be infinity. Using the standard I-V equations for a MOSFET, determine vo, when vi=2.3 V.

For the CMOS inverter stage in Figure 3, Kn = 3 mA/V2, Kp = 1 mA/V2, (W/L)Qp = 1/10, (W/L)QN = 1/30. The threshold voltages are VTHN = I-VTHPl = 1V. The Early voltages can be assumed to be infinity. Using the standard I-V equations for a MOSFET, determine vo, when vi=2.3 V.

Image text
For the CMOS inverter stage in Figure 3, Kn = 3 mA/V2, Kp = 1 mA/V2, (W/L)Qp = 1/10, (W/L)QN = 1/30. The threshold voltages are VTHN = I-VTHPl = 1V. The Early voltages can be assumed to be infinity. Using the standard I-V equations for a MOSFET, determine vo, when vi=2.3 V.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

For the CMOS inverter stage in Figure 3, Kn = 3 mA/V2, Kp = 1 mA/V2, (W/L)Qp = 1/10, (W/L)QN = 1/30. The threshold voltages are VTHN = I-VTHPl = 1V. The Early voltages can be assumed to be infinity. Using the standard I-V equations for a MOSFET, determine vo, when vi = -2.3 V.

Solution
0 0

To improve the performance of the differential amplifier shown in Figure Q1, the biasing current source is replaced by a Widlar current source. The collector resistors are replaced by a current mirror formed by the matched bipolar transistors Qs and Q6, and the bipolar transistors Q1 and Q2 are replaced by the matched field-effect transistors M1 and M2. A single-sided output at the drain terminal of M2 is used. The transistor parameters for the bipolar transistors are: β = 100, VBE (on) = VEB(on) = 0.7 V, and VA = 100 V. The transistor parameters for M1 and M2 are: Kn = 0.15 mA/V2, VT N = 0.8 V, λ = 0.01 V-1 . The improved differential amplifier is shown in Figure Q2. (a) Determine the quiescent voltages and currents of M1 and M2 when v1 = v2 = 0. (4 marks) (b) Design the value of resistor RE such that IQ = 0.1 mA. (2 marks) (c) Determine the maximum and minimum common-mode voltages that can be applied to v1 and v2. (3 marks) (d) Determine the percentage change in IQ when the common-mode voltage applied to v1 and v2 changes from the maximum to the minimum value obtained in part (c). (5 marks) (c) Define vd = v1 - v2, determine the differential-mode voltage gain Ad of the improved differential amplifier.
Solution
0 0

Estimate the value of the DC voltage gain (a low frequency AC voltage gain) for the CG stage in Figure 5. The PMOSFET gate length was 1.5 um. The NMOSFET gate length was a half of that for the PMOS device. The NMOSFET aspect ratio was selected to operate the transistors in the saturation region. The NMOSFET gate voltage was found to be 0.8 V. The DC bias current was not given. Assume the NMOS and PMOS devices have the standard process parameters: threshold voltages Vtn = 0.7 V and Vtp = −0.9 V, and the Early voltage parameters Va'n = 20 V/um and Va'p = 10 V/um, respectively. Your Answer: Answer Hide hint for Question 14 The drain current (both DC and AC components) passes through "Rin" into the source terminal and leaves the drain terminal into the PMOSFET which differential resistance rop represents Rload. The output voltage Vout is taken across Rload. The input voltage Vsig is applied across Rin. The voltage gain of the stage Vout/Vin can be found with the ratio Rload/Rin.

Solution
0 0