Question

Notify Me Bookmark

For the depletion type MOSFET amplifier circuit shown in Fig. Q.1, Figure Q. 1 i. Draw the small ac signal equivalent circuit. Neglect r0. ii. Calculate ID, Zi, ZO, and AV . Vov = VGS - VTh. iii. Calculate the coupling and bypass capacitors so that the low cutoff frequencies are fc1 = fc2 = 10 Hz, and fcs = 100 Hz. What is the low cutoff frequency (fL) of the amplifier?

For the depletion type MOSFET amplifier circuit shown in Fig. Q.1, Figure Q. 1 i. Draw the small ac signal equivalent circuit. Neglect r0. ii. Calculate ID, Zi, ZO, and AV . Vov = VGS - VTh. iii. Calculate the coupling and bypass capacitors so that the low cutoff frequencies are fc1 = fc2 = 10 Hz, and fcs = 100 Hz. What is the low cutoff frequency (fL) of the amplifier?

Image text
For the depletion type MOSFET amplifier circuit shown in Fig. Q.1, Figure Q. 1 i. Draw the small ac signal equivalent circuit. Neglect r0. ii. Calculate ID, Zi, ZO, and AV . Vov = VGS - VTh. iii. Calculate the coupling and bypass capacitors so that the low cutoff frequencies are fc1 = fc2 = 10 Hz, and fcs = 100 Hz. What is the low cutoff frequency (fL) of the amplifier?

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Consider MOSFET-based current source circuits shown below. Assume that the n-type MOSFET transistors follow the long-channel model with μnCox = 100 μA/V2 and Vth,n = 0.5 V. All the transistors have a fixed channel length L = 0.25 μm. The bias voltage VB1 is at 0.8 V. Assume that all transistors have no back-bias effect. (1) (2) (a) For a basic current source in Fig. (1), size the NMOS transistor M1's width ( = W1) so that it conducts a current of 1 mA when it operates in saturation region. You may assume λn = 0. (b) What is the minimum value of Vout for this circuit that keeps M1 in saturation region? (c) For a cascode current source in Fig. (2), assume that the transistor M2 has the same width with M1 you determined from part (a). Determine the value of VB2 that yields the lowest minimum VOUT keeping both M1 and M2 in saturation regions. (d) Now, let's assume that the transistors M1 and M2 have a finite output resistance with λn = 0.1 V−1. Compute the value of the output resistance (Rout) of this cascode current source when M1 and M2 are in the saturation region. (Hint: Calculate the output impedance in a small signal equivalent circuit.)
Solution
0 0

[Small Signal Analysis] Consider the following amplifier circuit consisting of an N-type MOSFET, λ = 0 and vSB = 0. RG = 100kΩ, RD = 3kΩ, RS = 1kΩ, CC and CS are both so large that 1/(jωC) ∼ 0 at the frequency of interest. VDD = 1.0v. The MOSFET has kn = 0.8 mA/V2 and Vt = 0.4v. (a) Analyze the DC bias point of this circuit. What are the DC values of VOUT and VS , respectively? (b) Calculate gm for the MOSFET. (c) What is the maximum allowed value of RD so that the MOS transistor remains in saturation mode? (d) Draw the small signal equivalent circuit for this amplifier. (e) What is the small signal gain Av? (f) What is the input resistance Rin?
Solution
0 0

(a) For the circuit shown in figure 1(a), find the following [20] i. Vi(s)/Vs(s) ii. Vo(s)/Vi(s) iii. Vo(s)/Vs(s) iv. Draw the magnitude plot for |T(jω)| in dBvs. frequency v. Lower 3 dB cut-off frequency fL vi. Upper 3 dB cut-off frequency fH vii. Bandwidth (b) Consider the n-channel MOSFET amplifier in figure 1(b). ID = 12 kn′W L(VGS − Vt)2, VDD = 5 V, RL = 2 kΩ, kn′WL = 1 mA/V2, Vt = 1 V. You can ignore channel length modulation. CC is the input coupling capacitor. You can assume it is infinitely large. [10] i. Determine the required ratio RA/RB such that the MOSFET gm = 1 mA/V. Remember that gm is defined as ∂ID/∂VGS ii. Draw the small-signal π model for the amplifier iii. Calculate the gain Vout/Vin (for gm = 1 mA/V ) (a) Figure for question 1 (a) (b) Figure for question 1 (b)

Solution
0 0