Question

Notify Me Bookmark

For the following circuit: a. Is this a Moore or Mealy model (5 points)? b. Write the flip flop input and next state equations (20 points), c. Write the output equation (5 points) d. Complete a state table for the circuit ( 20 points) e. Complete the timing trace as far as possible (20 points) (Assume both flip-flops are connected to a shared clock.)

For the following circuit: a. Is this a Moore or Mealy model (5 points)? b. Write the flip flop input and next state equations (20 points), c. Write the output equation (5 points) d. Complete a state table for the circuit ( 20 points) e. Complete the timing trace as far as possible (20 points) (Assume both flip-flops are connected to a shared clock.)

Image text
  1. For the following circuit: a. Is this a Moore or Mealy model (5 points)? b. Write the flip flop input and next state equations (20 points), c. Write the output equation (5 points) d. Complete a state table for the circuit ( 20 points) e. Complete the timing trace as far as possible ( 20 points) (Assume both flip-flops are connected to a shared clock.)

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Chapter 6, problem 7: For each of the following circuits, complete the timing diagram for the state of each flip flop and the output, where shown. All flip flops are trailing-edge triggered. For those circuits in which there is no clear input, assume each flip flop starts at 0. (a) Chapter 6, problem 8: For the following circuit and input string: Show a timing trace for the flip-flops and the output as far as possible. Assume that the initial value of each flip flop is 0.
Solution
0 0

Task 4 Digital Circuits Fig. 4.1 Fig. 4.2 Given are the CMOS gates according to Fig. 4.1 und Fig. 4.2. a) For the gate from Fig. 4.1 determine the output logic values of Y for all possible input logic values A, B, and C and enter them into a truth table. For some logic states you will not be able to determine the output logic value. Denote these states with Y = Z and explain why a definite value for Y cannot be given. b) Now consider the circuit in Fig. 4.2. Determine the output logic values of Y for all possible input logic values A, B, C, and D and enter them into a truth table. c) Draw the circuit diagram of a level-sensitive D-latch and an edge-triggered master-slave Dflipflop. Given is a sequential circuit according to Fig. 4.3. The edge-triggered registers exhibit the following specifications: setup-time tsetup = 200 ps, hold-time thold = 100 ps, propagation delay tpcq = 50 ps, and contamination delay tccq = 50 ps. The maximum clock frequency is 1 GHz. Fig. 4.3 d) Determine the minimal contamination delay tcd for the combinational logic. e) Determine the maximum propagation delay tpd for the combinational logic.
Solution
0 0

Assumptions for all problems (unless specified otherwise, give answers to 10% ): VDD(V) VT0( V) Body effect γ(V 0.5 ) VDSAT( V) k’ (A/V 2) λ(V -1 ) NMOS 2.0 0.4 0 0.5 500×10-6 0 PMOS -0.4 0 -0.5 -200×10-6 0 1. All transistors have the minimum length (Lunit = 250 nm) 2. Ignore body effect and channel length modulation 3. A transistor's intrinsic capacitance (cap) and gate cap are equal, i.e., Cint = Cg, γ = 1 4. The unit-sized transistor has Wunit = Lunit and intrinsic cap Cint = Cg = Cdb = Csb = 1.0fF. 5. For the unit sized inverter, β = (W/L)P / (W/L N = WP/WN = 2, WN = L = 250 nm 6. The unit sized transmission gate has a resistance Req,tr = 10kΩ and all caps of 1.0fF. a) (6 pts) How does the following circuit operate? In a few words/charts, describe what it does Sketch the waveforms of nodes X and Q given the inputs shown below. Initial state of signals X and Q are unknown (mark with xxx as needed) until the impact of the input signals propagate. X Q b) (4 pts) How would you size each transistor? Match the 2:1 inverter (including the clock). Draw the sizing next to the schematic. Calculate the switch model equivalent resistance(s) (note the equation given at the front of the exam for Req, switch model capacitance(s) (based on your sizing), and worst-case propagation delay through the circuit, max(tpLH,tpLH), where output is taken from Q and inputs are IN1 and IN2. c) (4 pts) Calculate the energy consumption from the VDD power supply of this circuit for the input pattern and time duration given in the timing diagram (previous page). Ignore the energy consumption related to driving IN1, IN2, and CLK. State any assumptions you need to make to determine a numerical value.

Assumptions for all problems (unless specified otherwise, give answers to 10% ): VDD(V) VT0( V) Body effect γ(V 0.5 ) VDSAT( V) k’ (A/V 2) λ(V -1 ) NMOS 2.0 0.4 0 0.5 500×10-6 0 PMOS -0.4 0 -0.5 -200×10-6 0 1. All transistors have the minimum length (Lunit = 250 nm) 2. Ignore body effect and channel length modulation 3. A transistor's intrinsic capacitance (cap) and gate cap are equal, i.e., Cint = Cg, γ = 1 4. The unit-sized transistor has Wunit = Lunit and intrinsic cap Cint = Cg = Cdb = Csb = 1.0fF. 5. For the unit sized inverter, β = (W/L)P / (W/L N = WP/WN = 2, WN = L = 250 nm 6. The unit sized transmission gate has a resistance Req,tr = 10kΩ and all caps of 1.0fF. a) (6 pts) How does the following circuit operate? In a few words/charts, describe what it does Sketch the waveforms of nodes X and Q given the inputs shown below. Initial state of signals X and Q are unknown (mark with xxx as needed) until the impact of the input signals propagate. X Q b) (4 pts) How would you size each transistor? Match the 2:1 inverter (including the clock). Draw the sizing next to the schematic. Calculate the switch model equivalent resistance(s) (note the equation given at the front of the exam for Req, switch model capacitance(s) (based on your sizing), and worst-case propagation delay through the circuit, max(tpLH,tpLH), where output is taken from Q and inputs are IN1 and IN2. c) (4 pts) Calculate the energy consumption from the VDD power supply of this circuit for the input pattern and time duration given in the timing diagram (previous page). Ignore the energy consumption related to driving IN1, IN2, and CLK. State any assumptions you need to make to determine a numerical value.

Assumptions for all problems (unless specified otherwise, give answers to 10% ): VDD(V) VT0( V) Body effect γ(V 0.5 ) VDSAT( V) k’ (A/V 2) λ(V -1 ) NMOS 2.0 0.4 0 0.5 500×10-6 0 PMOS -0.4 0 -0.5 -200×10-6 0 1. All transistors have the minimum length (Lunit = 250 nm) 2. Ignore body effect and channel length modulation 3. A transistor's intrinsic capacitance (cap) and gate cap are equal, i.e., Cint = Cg, γ = 1 4. The unit-sized transistor has Wunit = Lunit and intrinsic cap Cint = Cg = Cdb = Csb = 1.0fF. 5. For the unit sized inverter, β = (W/L)P / (W/L N = WP/WN = 2, WN = L = 250 nm 6. The unit sized transmission gate has a resistance Req,tr = 10kΩ and all caps of 1.0fF. a) (6 pts) How does the following circuit operate? In a few words/charts, describe what it does Sketch the waveforms of nodes X and Q given the inputs shown below. Initial state of signals X and Q are unknown (mark with xxx as needed) until the impact of the input signals propagate. X Q b) (4 pts) How would you size each transistor? Match the 2:1 inverter (including the clock). Draw the sizing next to the schematic. Calculate the switch model equivalent resistance(s) (note the equation given at the front of the exam for Req, switch model capacitance(s) (based on your sizing), and worst-case propagation delay through the circuit, max(tpLH,tpLH), where output is taken from Q and inputs are IN1 and IN2. c) (4 pts) Calculate the energy consumption from the VDD power supply of this circuit for the input pattern and time duration given in the timing diagram (previous page). Ignore the energy consumption related to driving IN1, IN2, and CLK. State any assumptions you need to make to determine a numerical value.
Solution
0 0