Question

Notify Me Bookmark

For the following circuit, VDD = 2 V, VBE = 0.7 V, VX = 0.8 V, kn = 20 mA/V2, IS = x fA (see below), γ = 0.25, λ = 0.3, VA = 20 V VT = 25.9 mV, 2ϕF = 0.8 V, VTH0 = 0.35 V, R1 = 20 kΩ are given. Find the values of R2 and R3. Is = 3.5 fA

For the following circuit, VDD = 2 V, VBE = 0.7 V, VX = 0.8 V, kn = 20 mA/V2, IS = x fA (see below), γ = 0.25, λ = 0.3, VA = 20 V VT = 25.9 mV, 2ϕF = 0.8 V, VTH0 = 0.35 V, R1 = 20 kΩ are given. Find the values of R2 and R3. Is = 3.5 fA

Image text
For the following circuit, VDD = 2 V, VBE = 0.7 V, VX = 0.8 V, kn = 20 mA/V2, IS = x fA (see below), γ = 0.25, λ = 0.3, VA = 20 V VT = 25.9 mV, 2ϕF = 0.8 V, VTH0 = 0.35 V, R1 = 20 kΩ are given. Find the values of R2 and R3. Is = 3.5 fA

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

For the circuit below, VCC = 20 V, VBE1 = VBE2 = 0.8 V, β = 300, VT = 25 mV, VA = ∞, R1 = 230 kΩ, R2 = 120 kΩ, RC1 = 12 kΩ, RC2 = 6 kΩ, RE1 = 500 Ω, RE2 = 3 kΩ, and RE3 = 4.5 kΩ are given. C∞s are very large coupling/bypass capacitors. a. Find the operating collector currents of T1 and T2. Neglect the base currents and assume α = 1. b. Find the value of RL1 such that the second stage output has symmetric clipping property. Assume VCEsat = 1.5 V. c. What is the voltage gain of the amplifier in dB ? d. Now, assume that the amplifier should drive a load of RL2 = 270 Ω. For this purpose, the circuit on the right is coupled to the node X in the multi-stage amplifier. Explain why this circuit has been preferred. a. Find the value of IDC given that kn,T3 = 30 mA/V2 and λ = 0, such that the voltage gain of the newly-added stage is AV, T3 = 0.9. Assume that T3 operates in the saturation region.
Solution
0 0

Figure 3 shows an amplifier with a current mirror as an active load. The MOSFETs have the following parameters: Vtn = −Vtp = 0.6 V, kn′ = 200 μA/V2, kp′ = 65 μA/V2, VA(NMOS) = 20 V, VA(PMOS) = 10 V, VT = 26 mV, R1 = 7 kΩ, R2 = 10 kΩ, L = 0.4 μm and W = 4 μm. The base-emitter forward voltage, VBE, of transistor Q4 is 0.7 V. The forward voltage drop for both D1 and D2 is 0.7 V. The supply voltage, VDD = 3 V. Assume the base current of Q4 is negligible compared to the emitter and collector currents of Q4, with all the transistors biased in the active region. (a) Identify the transistors forming the current mirror. (b) Calculate the value of IREF . (c) Calculate the output resistances of transistors Q1 and Q2.
Solution
0 0

Q2 - For the amplifier circuit in Figure Q2, VDD = 6 V, IB = 1 mA, RG1 = RG2 = 2 MΩ, RL = 10 kΩ, and CA = C2 = 0.1 μF. The transistor is characterized by the following parameters. Vs = 0.5 V, kn = 2 mA/V2, and VA = 20 V Figure Q2. (a) Find Vov and VGs for the transistor. Ignore channel length modulation for this part. (b) What is the midband gain of the amplifier? (c) What is the input impedance (Rm) of the amplifier? (d) What is the output impedance (Ro) of the amplifier? (e) Find the lower −3 dB cutoff frequency (fL). (f) Construct the small signal equivalent circuit in Ltspice and run an AC simulation. Mark the lower -3 dB(f1) frequency. Compare it to your hand calculation.

Solution
0 0