Question

Notify Me Bookmark

For the following inverter input and output pulse responses, obtain the: rise time, fall time, edge rate, high-to-low and low-to-high propagation delays.

For the following inverter input and output pulse responses, obtain the: rise time, fall time, edge rate, high-to-low and low-to-high propagation delays.

Image text
For the following inverter input and output pulse responses, obtain the: rise time, fall time, edge rate, high-to-low and low-to-high propagation delays.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Design a complex CMOS gate implementation of the following function: Y = A⋅(B + C)⋅D¯ a) Draw a logic circuit schematic for Y in which the Pull-Up Network (PUN) is the dual of the Pull-Down Network (PDN). Make sure to draw any necessary inverters for inputs. b) Assume that a basic matched inverter has a channel length of L = 0.25 μm, an NMOS channel width of WN = 0.5 μm and a PMOS channel width of WP = 1.0 μm, and that this sizing guarantees at least equal output current driving capability (i.e., equal high-to-low and low-to-high propagation delays). Determine the proper W/L ratios for each transistor in the complex logic gate to ensure a current driving capability at least equal to that of the basic matched inverter. Keep the W/L ratios as small as possible to minimize the gate's area. Calculate the total area of the complex CMOS circuit, including the area of the inverters for inputs.
Solution
0 0

Consider the inverter below, whose output has falling and rising transitions due to the step input provided by the timing diagram below. a) In the average current method, the falling transition (propagation) delay is calculated by averaging the currents at point "A" (t = 0+, vo = VDD) and point "B" (t = tPHL, vo = VDD/2). Delta V is the voltage difference between point "A" and point "B". tPHL = C times Delta V/Iav, Iav = IA + IB/2 C = 5 fF (5*10^-15 F), V_D = 1.2 V, Vt = 0.3V, unCox = 300 uA/V^2. For QN transistor, (W/L) = 10. Find the currents at points A and B, and use the average current method to calculate the high-to-low inverter propagation delay (tPHL).
Solution
1 0

For the circuit in Figure 4, you can ignore body effect and channel length modulation. Equivalent resistance Req (W/L=1) of NMOS and PMOS transistors are Rn = 10 k and Rp = 25 k, respectively. (a) What function is implemented by this circuit? (b) Calculate the worst-case low-to-high propagation delay. Assume that all output capacitances are lumped together into a single load capacitance CL = 45fF. You may ignore all intermediate (internal) capacitances for this part. (c) Calculate the fastest high-to-low propagation delay. CL = 45fF. You may ignore all intermediate (internal) capacitances for this part. (d) What are the input patterns that give the worst-case tpHL and tpLH. State clearly what the initial input patterns are and which input(s) has to make a transition in order to achieve this maximum propagation delay. Consider the effect of the capacitances at the internal nodes for part (d).

For the circuit in Figure 4, you can ignore body effect and channel length modulation. Equivalent resistance Req (W/L=1) of NMOS and PMOS transistors are Rn = 10 k and Rp = 25 k, respectively. (a) What function is implemented by this circuit? (b) Calculate the worst-case low-to-high propagation delay. Assume that all output capacitances are lumped together into a single load capacitance CL = 45fF. You may ignore all intermediate (internal) capacitances for this part. (c) Calculate the fastest high-to-low propagation delay. CL = 45fF. You may ignore all intermediate (internal) capacitances for this part. (d) What are the input patterns that give the worst-case tpHL and tpLH. State clearly what the initial input patterns are and which input(s) has to make a transition in order to achieve this maximum propagation delay. Consider the effect of the capacitances at the internal nodes for part (d).
Solution
1 0